DataStor
DataStor Epson Home 20 ELPLP33 135W UHE projector lamp
A replacement lamp module with a 135W UHE bulb and housing delivers 2,000 to 3,000 hours of projection life
- TypeUHE
- Wattage135W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Genuine compatible replacement for Epson Home 20 projectors
- Ready-to-install module with new 135 W UHE bulb and housing
- Up to 3000 hours lamp life in Economy mode
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and run-time reliability
Genuine ELPLP33 replacement module
The DataStor Epson Home 20 lamp ships as a complete ELPLP33 housing with a new 135W UHE bulb inside. It is built for owners of compatible Epson projectors who need a direct, ready-to-install replacement without separate bulb handling.
Rated hours in two operating modes
In normal mode the lamp is rated for 2000 hours of use, while economy mode extends the rating to 3000 hours. Brightness and fan noise drop in economy mode, giving a longer interval between replacements for less demanding viewing conditions.
135W UHE power envelope
The 135W UHE design sets the thermal and electrical envelope the projector must support. Units that cannot sustain this wattage or lack the correct ignition circuit will not operate the lamp reliably.
Highlights
- Genuine compatible replacement for Epson Home 20 projectors
- Ready-to-install module with new 135 W UHE bulb and housing
- Up to 3000 hours lamp life in Economy mode
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and run-time reliability
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 135W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
How much heat and power does the 135W UHE bulb produce during all-day use?
The lamp draws 135 watts and is rated for 2,000 hours in Normal mode or 3,000 hours in Economy mode, so heat output stays consistent with the projector's original cooling design.
Which Epson projectors accept the ELPLP33 housing so I know mine will fit?
This module is built for the Epson Home 20 series and matches the ELPLP33 form factor, letting it slide directly into the existing lamp cage without adapters.
Will the 135W UHE lamp work reliably in an older Home 20 unit that has run earlier ELPLP33 bulbs?
Yes — the replacement meets ISO 9001 quality checks for ignition, voltage and run-time, so it behaves like the original lamp in the same projector.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



