DataStor
DataStor Epson H425A ELPLP64 UHE 275W 2000 Hrs projector lamp
Genuine compatible replacement lamp with 275W UHE bulb and housing, rated for 2000 hours
- TypeUHE
- Wattage275W
- Lamp Life2,000 Hrs.
- Ready to install with pre-assembled housing
- UHE lamp technology rated at 275W power
- 2000 hour lamp life for extended use
- Manufactured to ISO9001 quality standards
- Compatible with Epson ELPLP64 projector models
Genuine Epson H425A replacement lamp
The DataStor Epson H425A module supplies a new 275 W UHE bulb inside a complete housing that matches the ELPLP64 specification. It arrives ready to fit without extra assembly and is rated for 2,000 hours of operation. Each unit is checked for beam performance, ignition voltage and run-time before dispatch. The lamp meets ISO 9001 manufacturing standards.
Projector owners needing a direct ELPLP64 swap
This module suits anyone whose Epson projector calls for the H425A or ELPLP64 part number and who wants a plug-in replacement with a 90-day warranty period. Buyers who require a different wattage, an alternative lamp type or a bare bulb without housing should look at other options. The product is sold as a single complete unit only.
Steady output through the rated 2,000-hour life
Under continuous use the 275 W UHE bulb maintains consistent brightness and colour stability for the full rated span. Quality checks on ignition and voltage ensure reliable start-up from cold and during repeated on-off cycles. The assembled housing keeps alignment fixed so light output does not drift as the lamp ages.
Highlights
- Ready to install with pre-assembled housing
- UHE lamp technology rated at 275W power
- 2000 hour lamp life for extended use
- Manufactured to ISO9001 quality standards
- Compatible with Epson ELPLP64 projector models
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 275W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which Epson projector models accept the H425A ELPLP64 lamp module?
The H425A ELPLP64 module is built for Epson projectors that specify the ELPLP64 lamp code; check your projector's manual or lamp door label for that exact code before ordering.
Can I reuse the existing lamp housing from an older ELPLP64 lamp with this 275W UHE bulb?
This unit arrives as a complete bulb-and-housing assembly, so no separate housing is needed and the old housing should not be reused.
How do I verify the new lamp is recognised and the hour counter starts at zero after installation?
After fitting the lamp, open the projector menu, reset the lamp-hour counter to zero, and confirm the display shows 0 hours and normal brightness.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



