DataStor
DataStor Epson H369 / ELPLP58 UHE 200W 4000 Hrs Projector Lamp
A ready-to-install replacement lamp module with a 200 W UHE bulb rated for 4,000 hours of projection life
- TypeUHE
- Wattage200W
- Lamp Life4,000 Hrs.
- Genuine compatible replacement for Epson H369 projectors
- Ready-to-install module with 200W UHE bulb and housing
- ISO 9001 manufacturing ensures beam performance and ignition quality
- 4,000-hour lamp life reduces replacement frequency
- 90-day warranty and 30-day return window included
Replacement lamp for Epson projectors
The DataStor H369 module matches Epson part ELPLP58 and arrives as a fully assembled bulb-and-housing unit ready for immediate installation. It uses a UHE 200W lamp rated for 4,000 hours of operation. The product is new and built to ISO 9001 quality standards.
Suitable for owners of compatible Epson models
Buyers who need a different wattage, a bare bulb without housing, or a lamp for a non-Epson projector should look elsewhere. This module is designed only for the specific Epson models that accept the ELPLP58 designation.
Verify the exact projector model accepts ELPLP58
Confirm that your device lists the H369 or ELPLP58 part number in its manual or on the existing lamp label. Ensure the projector is powered off and cooled down before replacing the module.
Highlights
- Genuine compatible replacement for Epson H369 projectors
- Ready-to-install module with 200W UHE bulb and housing
- ISO 9001 manufacturing ensures beam performance and ignition quality
- 4,000-hour lamp life reduces replacement frequency
- 90-day warranty and 30-day return window included
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 200W |
| Lamp Life | 4,000 Hrs. |
Questions about this item
Which Epson projector models accept the H369 / ELPLP58 lamp module?
The module is built for Epson projectors that specify the H369 or ELPLP58 part number; check your projector's manual to confirm it lists one of those codes before ordering.
Can I reuse the old lamp housing when installing this 200 W UHE lamp?
The lamp ships as a complete bulb-and-housing assembly, so the old housing is not needed — simply remove the old module and insert the new one.
How do I verify the new lamp is operating correctly after installation?
Reset the projector's lamp-hour counter, then confirm the menu shows zero hours and the image reaches full brightness without flicker during the first few minutes of use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



