DataStor
DataStor Epson H354C Compatible Projector Lamp 200W UHE
Compatible replacement lamp module with 200 W UHE bulb and housing rated for 5000 to 6000 hours
- TypeUHE
- Wattage200W
- Lamp Life5,000 (Normal) - 6,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- 200W UHE lamp matches original brightness
- Up to 6,000 hours life in economy mode
- ISO 9001 manufacturing ensures consistent quality
- Compatible with Epson H354C and ELPLP50 projectors
Compatible replacement for Epson H354C projectors
This DataStor lamp module fits Epson projectors using the H354C or ELPLP50 part number. It arrives as a fully assembled 200W UHE bulb inside its housing, so installation is straightforward. The lamp is built to ISO9001 quality standards and ships new.
Suitable for owners needing a direct H354C swap
Buyers with an Epson projector that accepts the H354C module will find this a ready-to-install replacement. It is not for users whose projector requires a different lamp code or a bare bulb without housing.
200W UHE bulb with 5,000 to 6,000 hour rated life
The lamp runs at 200W and is rated for 5,000 hours in normal mode or 6,000 hours in economy mode. This single figure determines whether the replacement matches the projector's original specification.
Highlights
- Ready to install with pre-assembled bulb and housing
- 200W UHE lamp matches original brightness
- Up to 6,000 hours life in economy mode
- ISO 9001 manufacturing ensures consistent quality
- Compatible with Epson H354C and ELPLP50 projectors
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 200W |
| Lamp Life | 5,000 (Normal) - 6,000 (Economy) Hrs. |
Questions about this item
What UHE wattage does the DataStor H354C lamp use and what lamp life does that support?
The lamp uses a 200W UHE bulb rated for 5,000 hours in normal mode and 6,000 hours in economy mode.
Which Epson projectors accept the H354C lamp module with its integrated housing?
The H354C (ELPLP50) fits Epson projectors that specify the H354C or ELPLP50 lamp module; the bulb and housing come pre-assembled for direct installation.
How is the H354C lamp installed and what step do users often miss?
Power off and cool the projector, remove the lamp cover, release the retaining screws, slide out the old module, insert the new H354C unit until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the projector menu.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MADE IN USA TONER toner cartridge for KIP 7170 103 2 x 400 gm black
- Black
- Compatible



