DataStor
DataStor Epson H309C UHE 200W 4000 Hrs Projector Lamp
A complete replacement lamp module with a 200W UHE bulb rated for 4,000 hours, supplied in its housing for direct installation
- TypeUHE
- Wattage200W
- Lamp Life4,000 Hrs.
- Ready to install with pre-assembled bulb and housing
- UHE 200W bulb delivers 4000 hours of projection time
- Manufactured to ISO9001 quality standards for reliable performance
- Genuine compatible replacement for Epson H309C projectors
- ELPLP58 module ensures correct fit and operation
Ready-to-Install Replacement Lamp
The DataStor Epson H309C module arrives as a complete bulb-and-housing assembly matched to the ELPLP58 specification. It is intended for owners of compatible Epson projectors who need a direct swap without separate bulb handling. The unit is new and built to ISO9001 quality checks covering beam performance, ignition, voltage and run-time.
UHE 200W Bulb in Fixed Housing
A 200W UHE lamp is pre-mounted inside the projector-specific housing, so alignment is fixed at the factory and installation only requires the projector’s standard lamp-door procedure. No additional tools or cable adapters are mentioned in the specifications, and the housing matches the original mechanical interface.
Restores Original Brightness for 4,000 Hours
This lamp replaces a dimmed or expired ELPLP58 module and returns the projector to its factory-rated output for an estimated 4,000 hours of use. The upgrade is worthwhile when image brightness has fallen below usable levels or the projector signals end-of-life. It does not suit users seeking higher lumen output than the original design or a different lamp technology.
Highlights
- Ready to install with pre-assembled bulb and housing
- UHE 200W bulb delivers 4000 hours of projection time
- Manufactured to ISO9001 quality standards for reliable performance
- Genuine compatible replacement for Epson H309C projectors
- ELPLP58 module ensures correct fit and operation
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 200W |
| Lamp Life | 4,000 Hrs. |
Questions about this item
Which Epson projector models accept the H309C lamp with ELPLP58 part number?
This module is built for Epson projectors that specify the ELPLP58 lamp; the housing matches the original mount so no adapter is needed.
What clearance does the assembled housing need inside the projector chassis?
The unit ships as a complete bulb-and-housing assembly sized to the factory lamp cavity; verify your projector’s lamp-door dimensions before ordering.
What is the correct reset procedure after fitting the new 200W UHE lamp?
Install the module, power on the projector, then use the menu to reset the lamp timer to zero so the 4,000-hour counter starts fresh.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



