DataStor
DataStor ELPLP71 Projector Lamp UHE 190W 2000-3000 Hrs
Replacement lamp module with 190W UHE bulb rated for 2000 to 3000 hours, ready to install
- TypeUHE
- Wattage190W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready to install with pre-assembled housing
- UHE 190W bulb matches original specs
- 2000 hours normal or 3000 hours economy life
- ISO 9001 quality checks on every unit
- Compatible with Epson EB 475W projectors
Epson ELPLP71 replacement lamp module
The DataStor ELPLP71 is a new projector lamp module with a 190W UHE bulb pre-assembled in its housing for direct installation. It is designed for the Epson EB 475W projector and suits schools or offices that need a ready-to-fit spare.
Upgrade from a dimming original lamp
This module replaces an aging ELPLP71 lamp when brightness drops below usable levels or the projector warns of end-of-life. The change is worth it when the current unit reaches the 2000-hour normal limit or 3000-hour economy limit and image quality no longer meets presentation needs.
UHE lamp life and power constraints
The UHE bulb runs at 190W and is rated for 2000 hours in normal mode or 3000 hours in economy mode. Economy mode reduces light output to extend runtime, so buyers who need maximum brightness for large venues cannot rely on the longer figure. Buyers needing longer rated life or different wattage must choose a different lamp model.
Highlights
- Ready to install with pre-assembled housing
- UHE 190W bulb matches original specs
- 2000 hours normal or 3000 hours economy life
- ISO 9001 quality checks on every unit
- Compatible with Epson EB 475W projectors
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 190W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What projector models does the ELPLP71 lamp module fit?
The ELPLP71 module is built for the Epson EB 475W projector and matches the original housing dimensions for direct replacement.
How do I install the ELPLP71 lamp, and what step is often missed?
Power off and unplug the projector, let it cool, remove the lamp cover, undo the securing screws, slide out the old module, insert the new ELPLP71 unit, tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most people forget.
When will the ELPLP71 lamp need replacement, and what indicates end of life?
Expect 2000 hours in normal mode or 3000 hours in economy mode; the projector will dim noticeably and display a lamp-replacement warning when the limit is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



