We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Datamax thermal printhead for H-4310 300dpi printer

Datamax

Datamax Printhead H-4310 300dpi PHD20-2241-01

SKU CH-KDGT-K1TBG

300 dpi thermal printhead for Datamax H-4310 and A-4310 MarkII printers, part PHD20-2241-01

  • Product TypePrinthead
  • Compatible printhead for Datamax H-4310 and A-4310 MarkII printers
  • 300dpi resolution produces sharp thermal labels
  • New condition ensures reliable performance from first use
  • Part number PHD20-2241-01 matches OEM specification
  • Package includes one thermal printhead ready to install

Direct replacement for H-4310 and A-4310 MarkII

This new compatible printhead carries part number PHD20-2241-01 and is built for the Datamax H-4310 and A-4310 MarkII thermal label printers. It restores 300dpi output when the original head wears out. The package contains one thermal printhead ready for installation.

Thermal operation at 300dpi

The head uses direct thermal technology so no ink, toner or ribbon is required during normal printing. Power draw stays low because only the heated elements activate for each label. Acoustic output is minimal with no moving print mechanism beyond the media feed.

Sustained high-volume labelling

Under continuous roll-fed workloads the head maintains consistent dot density across thousands of labels. Thermal cycling is managed by the printer firmware to prevent overheating during long print runs. It is not suited for applications needing colour or resolutions above 300dpi.

Highlights

  • Compatible printhead for Datamax H-4310 and A-4310 MarkII printers
  • 300dpi resolution produces sharp thermal labels
  • New condition ensures reliable performance from first use
  • Part number PHD20-2241-01 matches OEM specification
  • Package includes one thermal printhead ready to install

Specifications

Product TypePrinthead

Questions about this item

How do I install the PHD20-2241-01 printhead in my Datamax H-4310 and what step causes the most alignment issues?

Power off the printer, open the printhead latch, remove the old head, seat the new PHD20-2241-01 firmly until it clicks, close the latch, then run the printer's calibration routine; skipping calibration after latch closure is the step that causes misaligned labels.

What maintenance or replacement will the PHD20-2241-01 printhead need over its service life?

Clean the printhead with isopropyl alcohol and a lint-free swab every roll change or when print quality fades; the head itself is a consumable and will eventually require full replacement once heating elements degrade.

What limit appears first on the PHD20-2241-01 during sustained high-volume printing?

The 300dpi thermal elements heat continuously during long runs; thermal throttling or element fatigue will reduce print density before mechanical wear becomes an issue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.