Datalogic
Datalogic QuickScan QD2131 barcode scanner
Handheld 2D area imager scans omnidirectionally at 270 scans per second with IP42 sealing and 1.5 m drop resistance
- Form FactorHandheld
- ConnectivityCorded
- Scan Engine2D Area Imager
- Included CablesUSB Cable w/ Stand
- Interfaces SupportedUSB
- Light SourceLED
- Fast 270 scans per second for rapid checkout throughput
- Omnidirectional reading captures codes from any angle
- LED aiming system reduces operator visual stress during long shifts
- Green Spot feedback confirms good reads without looking at the screen
- IP42 sealing and 1.5 m drop resistance protect against daily wear
Handheld 2D imager
The Datalogic QuickScan QD2131 is a corded handheld barcode scanner built around a 2D area imager. It connects through a USB interface and draws operating current of 140 mA at 5 VDC. The scanner reads 1D and 2D codes omnidirectionally at up to 270 scans per second.
High-volume checkout use
Retail cashiers and warehouse pack stations benefit from the LED aiming system that reduces visual stress during repetitive scanning. The IP42 sealing and 1.5 m drop resistance suit constant daily handling. Buyers needing wireless freedom or long-range scanning should look at other form factors.
USB-powered 2D imaging
The single specification that decides fit is the corded USB connection combined with a 2D area imager. It requires a host port that can supply 4.75 to 14 VDC and mounts in the included stand for hands-free presentation scanning.
Highlights
- Fast 270 scans per second for rapid checkout throughput
- Omnidirectional reading captures codes from any angle
- LED aiming system reduces operator visual stress during long shifts
- Green Spot feedback confirms good reads without looking at the screen
- IP42 sealing and 1.5 m drop resistance protect against daily wear
Specifications
| Brand | Datalogic |
|---|---|
| Series | QuickScan QD2430 |
| Model | QD2430-BKK1S |
| Form Factor | Handheld |
| Connectivity | Corded |
| Scan Engine | 2D Area Imager |
| Included Cables | USB Cable w/ Stand |
| Interfaces Supported | USB |
| Light Source | LED |
| Scan Speed | 270 scan/s |
| Input Voltage | 4.75 - 14 VDC +/- 10% |
| Current | Operating (Typical): 140 mA @ 5 VDC Standby/Idle (Typical): 50 mA @ 5 VDC |
| Color | Black |
| Dimensions | 6.40" x 3.60" x 1.60" |
| Weight | 5.30 oz. |
| Features | • Outstanding snappiness • Omnidirectional reading • Reduced visual stress with LED-based aiming system • Datalogic’s patented ‘Green Spot’ technology for good-read feedback • Advanced motion tolerance optics • Water and Particulate Sealing Rating: IP42 • Drop resistance to 1.5 m / 5.0 ft • Host download capability ready |
| Package Contents | 1X Barcode Scanner 1X USB Cable 1X Stand 1X Manual |
Questions about this item
Will the USB cable or stand need replacing after heavy daily use?
The kit includes a USB cable and stand; no user-serviceable parts are listed, so only the cable or stand would need replacement if physically damaged.
What limits continuous scanning throughput on this 2D imager?
The scan engine is rated at 270 scans per second, which is the maximum sustained capture rate under normal conditions.
How much heat or noise does the scanner produce during all-day operation?
Typical operating draw is 140 mA at 5 VDC with a 50 mA idle current; the LED illumination and imager run silently with no fan, so heat and noise remain minimal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MADE IN USA TONER toner cartridge for KIP 7170 103 2 x 400 gm black
- Black
- Compatible



