We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jet black 12 inch SATA power splitter cable with 4-pin Molex connector

Darkside Computer Modding

Darkside Computer Modding SATA 2-Way Power Cable 12" 30cm Jet Black 4-Pin Molex DS-0551

SKU CH-DPEX-VXNBP

Splits one 4-pin Molex connector into two SATA power plugs for drives mounted side-by-side in a cage

  • Cable Length1 ft.

Type 2-Way

  • 12" reach from Molex to first SATA connector for tidy routing
  • Powers two SATA drives from one Molex plug in tight bays
  • 30 cm total length keeps cable clutter low in drive cages
  • Jet black finish matches dark-themed builds without extra sleeving
  • 4-pin Molex input works with standard PSU leads for simple upgrades

Cable purpose

The Darkside Computer Modding SATA 2-Way Power Cable splits a single 4-pin Molex connector into two SATA power plugs. It is built for builders who need to run a pair of drives from one PSU lead inside a hard-drive cage.

Thermals noise power

Passive wiring draws no power of its own and adds no audible noise to the system. The jet-black insulation simply routes the existing supply rails to both connectors without active components.

Sustained load behaviour

Under continuous drive operation the cable carries the same current as the source Molex circuit allows. It suits installations where both drives stay powered for long periods, but it cannot compensate if the PSU rail is already near its limit.

Highlights

  • 12" reach from Molex to first SATA connector for tidy routing
  • Powers two SATA drives from one Molex plug in tight bays
  • 30 cm total length keeps cable clutter low in drive cages
  • Jet black finish matches dark-themed builds without extra sleeving
  • 4-pin Molex input works with standard PSU leads for simple upgrades

Specifications

Cable Length1 ft.

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 4-pin Molex to dual SATA power cable without bending the connectors?

Align the Molex key with the PSU socket, push straight in until it clicks, then route the 30 cm length to the first SATA drive and the second connector to the adjacent drive in the cage.

Will the Molex pins or SATA connectors need replacement after repeated drive swaps?

The 4-pin Molex and SATA power connectors are rated for many mating cycles; under normal drive changes they should not require replacement during the system's life.

What is the practical limit of this 12-inch cable when powering two drives under sustained load?

The 30 cm distance between the Molex source and the first SATA connector, plus the short hop to the second drive, is the limiting factor for drive placement in the cage.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.