Dap Nsf Commercial Kitchen Silicone
DAP 8660 Silicone Sealant 10 oz Cartridge Stainless Steel
Food-grade silicone sealant in a 10 oz cartridge, FDA 21 CFR 177.2600 and NSF/ANSI 51 compliant, withstands -40 to 400 °F, cures in one day
- Food-grade safety meets FDA 21 CFR 177.2600 and NSF/ANSI 51 standards
- Withstands extreme heat up to 400 Degrees F and cold down to -40 Degrees F
- Ready for service in one day with only five minutes working time
- Bonds ceramic, fiberglass, glass, metal, plastic, porcelain, rubber and wood
- Waterproof flexible seal protects surfaces in wet environments
Kitchen-Grade Sealant for Food-Contact Surfaces
DAP 8660 is a 10 oz cartridge of silicone sealant formulated for food-processing environments. It meets FDA 21 CFR 177.2600 and NSF/ANSI 51 standards for incidental food contact. The stainless steel colour matches commercial equipment and appliances.
Suited for Commercial Kitchens and Wet-Area Repairs
This product serves maintenance teams sealing ceramic, metal, glass, plastic, porcelain, rubber, fiberglass or wood in high-moisture zones. It stays flexible from -40 Degrees F to 400 Degrees F and cures fully in one day. Buyers needing a paintable sealant or a faster skin-over time should look elsewhere.
Check Surface Compatibility and Cure Schedule
Verify that the substrate is listed among the approved materials before applying. The working time is 5 min, so plan joint tooling accordingly. Ensure the service temperature range matches the installation environment and that a one-day full cure fits the project timeline.
Highlights
- Food-grade safety meets FDA 21 CFR 177.2600 and NSF/ANSI 51 standards
- Withstands extreme heat up to 400 Degrees F and cold down to -40 Degrees F
- Ready for service in one day with only five minutes working time
- Bonds ceramic, fiberglass, glass, metal, plastic, porcelain, rubber and wood
- Waterproof flexible seal protects surfaces in wet environments
Specifications
| Brand | DAP |
|---|
Questions about this item
What caulking gun fits the 10 oz cartridge?
A standard 10 oz caulking gun accepts this cartridge; load it and cut the nozzle to the bead size you need.
Can I apply it over existing cured silicone on my stainless sink?
Remove old sealant first; clean the surface dry, then apply fresh beads for a reliable bond.
How do I know the seal is fully cured and food-safe?
After one day at room temperature the sealant reaches full cure and meets FDA 21 CFR 177.2600 and NSF/ANSI 51 for food contact.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
