We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal industrial switch with five RJ45 ports and terminal power block

D-Link

D-Link DIS-100G-5W 5-Port Unmanaged Industrial Switch

SKU CH-DC8T-5NPDK

Five-port unmanaged Gigabit switch with fanless IP30 housing, dual 12–58 V DC power inputs and -40 °C to 75 °C operating range for harsh industrial sites

  • StandardsIEEE 802.3 for Ethernet IEEE 802.3u for Fast Ethernet IEEE 8
  • Network Management TypeUnmanaged
  • Primary Ports5 x RJ45
  • Primary Port Speed10/100/1000Mbps
  • MAC Address Table2K
  • Switching MethodStore and Forward
  • Operates from -40 °C to 75 °C for harsh industrial sites
  • Fanless, IP30-rated housing withstands shock, vibration and freefall per IEC standards
  • Dual 12–58 V DC inputs provide redundant power for continuous uptime
  • Five 10/100/1000 Mbps RJ45 ports with 9 KB jumbo frame support
  • Plug-and-play unmanaged operation with QoS and storm control built in

Industrial Gigabit Switch

The D-Link DIS-100G-5W is a 5-port unmanaged industrial switch built for harsh environments. Its fanless IP30 housing operates from -40 to 75 degrees Celsius with dual 12 to 58V DC power inputs for redundancy. Plug-and-play deployment suits factory automation, transportation and outdoor surveillance networks.

Five Copper Ports

Five 10/100/1000BASE-T RJ45 ports provide wire-speed Gigabit connectivity with a 2K MAC table and store-and-forward switching. The switch handles 9KB jumbo frames and supports IEEE 802.1p QoS with four hardware queues per port. Broadcast, multicast and unicast storm control protects bandwidth during traffic spikes.

Gigabit Ethernet Limits

The IEEE 802.3ab standard caps each copper link at 1000Mbps over 100 metres, so longer runs require fibre or repeaters not included here. Flow control follows IEEE 802.3x to pause frames during congestion. Maximum power draw is 3.57W, leaving no budget for PoE devices on this non-PoE model.

Highlights

  • Operates from -40 °C to 75 °C for harsh industrial sites
  • Fanless, IP30-rated housing withstands shock, vibration and freefall per IEC standards
  • Dual 12–58 V DC inputs provide redundant power for continuous uptime
  • Five 10/100/1000 Mbps RJ45 ports with 9 KB jumbo frame support
  • Plug-and-play unmanaged operation with QoS and storm control built in

Specifications

BrandD-Link
ModelDIS-100G-5W
StandardsIEEE 802.3 for Ethernet
IEEE 802.3u for Fast Ethernet
IEEE 802.3ab for Gigabit Ethernet
IEEE 802.3z for Gigabit fiber
IEEE 802.3x Flow Control
IEEE 802.3af/at Power over Ethernet (DIS-100G-5PSW)
IEEE 802.3az Energy-Efficient Ethernet (EEE)
Network Management TypeUnmanaged
Primary Ports5 x RJ45
Primary Port Speed10/100/1000Mbps
MAC Address Table2K
Switching MethodStore and Forward
Jumbo Frames9KB
PowerPower Input: 12 to 58V DC terminal block dual input
Power Consumptions: Maximum: 3.57W
FeaturesRobust Design
High EMC endurance, fanless design, and a wide operating temperature range combined with an IP30 housing to withstand harsh operating environments
Flexible Deployment
Plug-and-Play compact form factor design that supports multiple mounting options to allow for flexible and swift deployment
Power over Ethernet
PoE+ support capable of supplying up to 30W per port to extend the deployment range of PoE-powered devices in remote areas
Dimensions1.15" x 4.42" x 3.52"
Weight0.66 lb.
TemperatureOperating Temperature: -40 ~75 degree Celsius (-40 ~ 167 degree Fahrenheit)
Storage Temperature: -40 ~ 85 degree Celsius (-40 ~ 185 degree Fahrenheit)
HumidityOperating Humidity: 5% ~ 95% non-condensing
Storage Humidity: 5% ~ 95% non-condensing

Questions about this item

Will the 10/100/1000Mbps ports auto-negotiate with my older 10Mbps and 100Mbps devices?

Yes, each of the five RJ45 ports supports 10, 100 and 1000Mbps and will negotiate the highest common speed with legacy equipment.

How can I confirm the switch is operating correctly once powered up?

The unit is fanless and unmanaged; normal operation is indicated by the port LEDs showing link and activity for each connected cable.

Does the box include the DC power cables or terminal-block plugs needed for the dual 12 to 58V input?

The switch ships with the terminal-block connectors for dual power input; external DC power supplies and cables must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.