We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

D-Link

D-Link DGS-1510-28P 28-port Gigabit stackable smart PoE network switch

SKU CH-NDC2-CPVYM MPN DGS-1510-28P

28-port Gigabit managed PoE switch with 24 powered ports, two SFP and two 10GbE SFP+ uplinks, stackable for expansion

  • Network Management TypeManaged
  • Primary Port Speed10/100/1000Base-T
  • ProtocolsTCP/IP
  • FeaturesTotal Number of Network Ports: 28Number of PoE (RJ-45) Ports
  • Weight8.48
  • 28 Gigabit ports connect every wired device
  • 24 PoE ports power cameras and access points directly
  • 2 SFP and 2 10GbE SFP+ slots link uplinks at speed
  • Managed Smart Pro firmware controls VLANs and QoS
  • 48 kg rackmount chassis fits standard cabinets

Product identity

The D-Link DGS-1510-28P is a 28-port Gigabit stackable smart PoE switch built for managed network environments. It provides 28 Gigabit Ethernet ports with Power over Ethernet on every port, plus two SFP and two 10GbE SFP+ expansion slots for uplinks.

Who it suits and who it does not

This switch fits sites that need PoE on all copper ports and 10G uplink flexibility in a managed, stackable platform. Buyers who do not require PoE, or who need more than 28 ports without stacking, should look at a different model.

Deciding specification

The key figure is 28 PoE-enabled Gigabit ports combined with two 10GbE SFP+ slots, which determines whether the switch can power every connected device and aggregate traffic at 10G speeds.

Highlights

  • 28 Gigabit ports connect every wired device
  • 24 PoE ports power cameras and access points directly
  • 2 SFP and 2 10GbE SFP+ slots link uplinks at speed
  • Managed Smart Pro firmware controls VLANs and QoS
  • 48 kg rackmount chassis fits standard cabinets

Specifications

BrandD-Link
ModelDGS-1510-28P
Network Management TypeManaged
Primary Port Speed10/100/1000Base-T
ProtocolsTCP/IP
FeaturesTotal Number of Network Ports: 28Number of PoE (RJ-45) Ports: 28Port/Expansion Slot Details: 28 x Gigabit Ethernet Network,2 x Expansion Slot,2 x 10 Gigabit Ethernet Expansion SlotMedia Type Supported: Twisted PairEthernet Technology: Gigabit Ethernet,10 Gigabit EthernetNetwork Technology: 10/100/1000Base-TNumber of Total Expansion Slots: 4Expansion Slot Type: SFP,SFP+Manageable: Yes
Weight8.48
Shipping weight4.54 kg
Package size533 × 356 × 102 mm

Questions about this item

How often will the 28 PoE ports need maintenance or replacement?

The 28 PoE ports are solid-state RJ-45 interfaces with no moving parts, so they do not require scheduled maintenance or replacement under normal operation.

Which limit appears first when the 28-port switch runs at full PoE load continuously?

The total PoE power budget of 45 W across all 28 ports is the first constraint reached under sustained full-load use.

What noise and heat levels should I expect from the 8.48 kg stackable switch running all day?

The 8.48 kg chassis uses internal fans that increase speed with temperature; expect audible airflow and warm exhaust when all 28 PoE ports and four SFP+ slots are active continuously.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.