We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rack-mount network switch, matte black metal chassis with 52 front ports

D-Link

D-Link DGS-1210-52MP 52-port PoE+ network switch

SKU CH-MC4Q-39NTY

A 52-port smart managed Layer 2+ switch with 48 PoE+ ports, four Gigabit RJ45/SFP combo ports and a 370 W PoE budget

  • 48 PoE+ ports power cameras and access points without extra cabling
  • 370 W PoE budget supports dense deployments of powered devices
  • 4 Gigabit RJ45/SFP combo ports add flexible uplink options
  • L2+ static routing enables inter-VLAN traffic without a separate router
  • Web UI, CLI and SNMP provide multiple management choices

Product identity

The DGS-1210-52MP is a 52-port Gigabit smart managed switch with 48 PoE+ ports and four RJ45/SFP combo uplinks. It targets small and medium businesses that need to power wireless access points, IP cameras or VoIP phones from a single rack-mount unit.

Setup checks

Verify that your rack depth and power circuit can accommodate the 370 W PoE budget and the combined device load. Confirm that any SFP transceivers you plan to use match the combo port speed and are compatible with the switch firmware. Ensure existing VLAN, QoS and LACP configurations map to the 802.1Q and Link Aggregation features listed in the specification.

Thermals noise power

The switch uses D-Link Green 3.0 technology and complies with IEEE 802.3az Energy Efficient Ethernet to reduce idle power draw. Fan speed scales with internal temperature and PoE load, so acoustic output rises when the full 370 W budget is in use. Typical operation stays within the rated power envelope without external cooling requirements.

Highlights

  • 48 PoE+ ports power cameras and access points without extra cabling
  • 370 W PoE budget supports dense deployments of powered devices
  • 4 Gigabit RJ45/SFP combo ports add flexible uplink options
  • L2+ static routing enables inter-VLAN traffic without a separate router
  • Web UI, CLI and SNMP provide multiple management choices

Specifications

No published specifications for this item yet.

Questions about this item

Does the DGS-1210-52MP include SFP modules or are they purchased separately?

The switch provides four Gigabit RJ45/SFP combo ports; SFP transceivers are not included and must be sourced separately.

When should I use the RJ45 versus the SFP side of the combo ports?

Use RJ45 for copper links up to 100 m; insert an SFP module when you need fibre uplinks or longer distances.

What does the 370 W PoE budget mean for powering 48 PoE+ ports?

The 370 W budget is shared across all 48 PoE ports, so the total draw of connected devices cannot exceed 370 W.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.