We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rackmount network switch with front-panel port array

D-Link

D-Link DGS-1210-52MP 52-port Gigabit Smart PoE network switch

SKU CH-R7TK-5744B MPN DGS-1210-52MP

A 52-port Gigabit smart switch with 48 PoE+ ports, four SFP uplinks and a 370 W power budget for IP cameras, access points and VoIP phones

  • FormatRackmount
  • StandardsIEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX (Fast Et
  • Network Management TypeSmart
  • Primary Ports48 x 10/100/1000BASE-T PoE 4 x SFP
  • Primary Port Speed10/100/1000Mbps
  • MAC Address Table16K
  • Power 48 PoE devices from a single 370W budget
  • Uplink via four Gigabit SFP ports for fibre links
  • Smart management through GUI, CLI, SNMP or D-View 7
  • Security hardened with ACL, 802.1X, ARP inspection and Safeguard Engine
  • 52-port rackmount switch fits 1U at 1.73" height

52-Port Gigabit Smart PoE Switch

The D-Link DGS-1210-52MP is a rackmount switch with forty-eight 10/100/1000BASE-T PoE ports and four Gigabit SFP ports. It targets network administrators who need centralised power for access points, cameras and VoIP phones. The 370 W PoE budget supports both 802.3af and 802.3at devices across all copper ports.

Store-and-Forward Switching with 3 MB Buffer

Store-and-forward operation checks every frame before forwarding, preventing corrupted packets from circulating under sustained load. The 3 MB buffer absorbs traffic bursts while the 16 K MAC address table maintains forwarding decisions. Jumbo frames up to 9216 bytes pass through without fragmentation.

Power Draw and Thermal Profile

Maximum consumption reaches 483.1 W with PoE active and drops to 48.9 W when PoE is disabled. Standby draw measures 29.5 W at 110 V and 27.5 W at 240 V. The 1U form factor fits standard racks without special cooling requirements.

Highlights

  • Power 48 PoE devices from a single 370W budget
  • Uplink via four Gigabit SFP ports for fibre links
  • Smart management through GUI, CLI, SNMP or D-View 7
  • Security hardened with ACL, 802.1X, ARP inspection and Safeguard Engine
  • 52-port rackmount switch fits 1U at 1.73" height

Specifications

BrandD-Link
ModelDGS-1210-52MP
FormatRackmount
StandardsIEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX (Fast Ethernet)
IEEE 802.3ab 1000BASE-T (Gigabit Ethernet)
IEEE 802.3x Flow Control for Full-Duplex Mode
Auto-negotiation
Network Management TypeSmart
Primary Ports48 x 10/100/1000BASE-T PoE
4 x SFP
Primary Port Speed10/100/1000Mbps
MAC Address Table16K
Switching MethodStore and Forward
VLAN SupportYes
Jumbo Frames9216 bytes
Buffer Memory3MB
ProtocolsTCP/IP
SecurityBroadcast / Multicast / Unicast Storm Control
D-Link Safeguard Engine
DHCP Server Screening
IP-MAC-Port Binding (Smart Binding)
Supports 512 address binding entries
ARP Inspection
ARP + IP Inspection
Supports DHCP Snooping
802.1X Port-based Access Control
ARP Spoofing Prevention
Max. 64 entries
Traffic Segmentation
SSH v2
SSL
Supports v1 / v2 / v3
Port Security
Supports up to 64 MAC addresses per port
Duplicate address detection
PoEYes
SNMPYes
QoSYes
Port MirroringYes
PowerPoE Power Budget: Max. 370W
Maximum Power Consumption :483.1W (PoE on) / 48.9W (PoE off)
Standby Power Consumption: 29.5W/110V, 27.5W/240V
Dimensions1.73" x 17.32" x 16.90"
Weight12.74 lbs.
TemperatureOperating Temperature: -5 ~ 50 degree Celsius (23 ~ 122 degree Fahrenheit)
Storage Temperature: -20 ~ 70 degree Celsius (-4 ~ 158 degree Fahrenheit)
HumidityOperating Humidity: 0% ~ 95% non-condensing
Storage Humidity: 0% ~ 95% non-condensing
Shipping weight8.18 kg
Package size564 × 556 × 150 mm

Questions about this item

How much power does the DGS-1210-52MP draw when all 48 PoE ports are active?

With PoE on the switch consumes up to 483.1W, while idle PoE-off draw is 48.9W and standby is 29.5W at 110V or 27.5W at 240V.

What cabling and modules are needed to use the four SFP uplinks on this switch?

The four SFP ports accept standard Gigabit SFP transceivers; you supply the modules and matching fibre or copper patch cords for each uplink.

Will my existing 100 Mbps cameras and printers work on the 48 PoE ports without extra configuration?

Yes, each 10/100/1000BASE-T port auto-negotiates speed so 100 Mbps devices connect immediately and receive PoE power under the 370W budget.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.