We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal rackmount switch with eight RJ45 ports and two SFP cages on the front face

D-Link

D-Link DGS-1210-10 10-port Gigabit Smart Managed network switch

SKU CH-K11G-FNS5P MPN DGS-1210-10

A 10-port Gigabit smart managed switch with 8 RJ45 and 2 SFP ports for high-speed networking and fiber uplinks

  • FormatRackmount
  • StandardsIEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX (Fast Et
  • Network Management TypeSmart
  • Primary Ports8 x RJ45 + 2 x SFP
  • Primary Port Speed10/100/1000Mbps
  • MAC Address Table16K
  • 8 Gigabit RJ45 ports deliver high-speed wired connections to multiple devices
  • 2 SFP slots enable long-distance fiber uplinks for flexible network expansion
  • Fan-less design ensures silent operation and lower energy consumption in any environment
  • Layer 2+ features including VLAN, QoS and static routing optimise traffic flow and reduce congestion
  • NDAA and TAA compliance meets strict government procurement standards for secure deployments

10-Port Gigabit Smart Managed Switch

The D-Link DGS-1210-10 is a 10-port Gigabit Smart Managed switch designed for small to medium business networks. It provides eight RJ45 ports and two SFP slots for fiber uplinks. The switch supports Layer 2+ features including static routing, VLANs, QoS, and port mirroring. A fanless design ensures silent operation in office or rack environments.

Ideal for SMB deployments needing fiber uplinks

This switch suits administrators who require managed features such as ACLs, 802.1X authentication, and IGMP snooping for surveillance or VoIP traffic. The 16K MAC address table and 9216-byte jumbo frame support handle moderate network loads. Buyers needing Layer 3 dynamic routing protocols or Power over Ethernet should consider other solutions. The fanless chassis limits thermal headroom for continuous maximum throughput across all ports.

1.5 MB buffer and 13.59 W maximum draw

The 1.5 MB packet buffer absorbs traffic bursts while the switch consumes up to 13.59 W under full load. Standby power measures 9.3 W at 110 V and 9.4 W at 240 V. Eight copper ports negotiate 10/100/1000 Mbps speeds and two SFP ports accept Gigabit transceivers for long-distance links. The internal universal power supply accepts 100 to 240 VAC at 50/60 Hz.

Highlights

  • 8 Gigabit RJ45 ports deliver high-speed wired connections to multiple devices
  • 2 SFP slots enable long-distance fiber uplinks for flexible network expansion
  • Fan-less design ensures silent operation and lower energy consumption in any environment
  • Layer 2+ features including VLAN, QoS and static routing optimise traffic flow and reduce congestion
  • NDAA and TAA compliance meets strict government procurement standards for secure deployments

Specifications

BrandD-Link
ModelDGS-1210-10
FormatRackmount
StandardsIEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX (Fast Ethernet)
IEEE 802.3ab 1000BASE-T (Gigabit Ethernet)
IEEE 802.3x Flow Control for Full-Duplex Mode
Network Management TypeSmart
Primary Ports8 x RJ45 + 2 x SFP
Primary Port Speed10/100/1000Mbps
MAC Address Table16K
Switching MethodStore and Forward
VLAN SupportYes
Jumbo Frames9216 bytes
Buffer Memory1.5MB
ProtocolsTCP/IP
SNMPYes
QoSYes
Layer2
Port MirroringYes
PowerAC Input: 100 to 240 VAC 50/60 Hz internal universal power supply
Maximum Power Consumption: 13.59W
Standby Power Consumption: 9.3W / 110V, 9.4W / 240V
Dimensions1.73" x 11.02" x 4.96"
Weight3.39 lbs.
TemperatureOperating Temperature: -5 ~ 50 degree Celsius (23 ~ 1122 degree Fahrenheit)
Storage Temperature: -20 ~ 70 degree Celsius (-4 ~ 158 degree Fahrenheit)
HumidityOperating Humidity: 0% to 95% non-condensing
Storage Humidity: 0% to 95% non-condensing
Shipping weight2.31 kg
Package size330 × 284 × 76 mm

Questions about this item

Do I need SFP transceivers to use the two fiber uplinks on this DGS-1210-10?

Yes, the two SFP ports accept standard Gigabit SFP modules which must be purchased separately for fiber or copper uplink connections.

Will the 8 RJ45 ports auto-negotiate with my older 100 Mbps devices?

Each RJ45 port supports 10/100/1000 Mbps and will auto-negotiate down to 100 Mbps or 10 Mbps for legacy equipment.

How can I confirm the switch is forwarding traffic at wire speed after installation?

Check the port LEDs for solid green link and blinking activity lights; then verify zero CRC errors and full 1000 Mbps negotiated speed in the Web Smart management interface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.