We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal rack-mount network switch with eighteen front ports

D-Link

D-Link DGS-1018P 18-port Gigabit PoE network switch

SKU CH-41GB-6WHYM MPN DGS-1018P

An 18-port Gigabit unmanaged PoE switch with a 240 W power budget and two SFP uplink slots

  • Primary Port Speed1000 megabits_per_second
  • Power12 volts_of_direct_current,
  • Dimensions8.26 L x 1.81 W x 17.32 H inches
  • Weight7.05 pounds
  • Temperature,
  • Features1x switch, 1x QIG, 1x power adapter
  • 18 ports deliver Gigabit speed to every connected device
  • 16 PoE ports supply up to 240 W total power budget
  • 2 SFP slots enable fibre uplinks for longer runs
  • Unmanaged operation means no configuration is required
  • Flow Control and Storm Control reduce packet loss during heavy traffic

Designed for SOHO and SMB networks

The D-Link DGS-1018P is an 18-port Gigabit unmanaged PoE switch built for small offices and growing businesses. It delivers high-speed wired connectivity while reducing energy use and keeping noise to a minimum. The unit ships with a power adapter and a quick installation guide.

Suits teams adding PoE devices without a managed

This switch fits deployments that need to power cameras, access points or VoIP phones through the network cable. It is not for administrators who require VLAN configuration, SNMP monitoring or link aggregation. Buyers needing remote management or advanced traffic shaping should look at managed alternatives.

240 W total PoE budget decides device count

The switch offers a 240 W PoE budget shared across all powered ports. This figure determines how many endpoints you can run simultaneously without an external injector. Check the power draw of each device against this limit before planning your installation.

Highlights

  • 18 ports deliver Gigabit speed to every connected device
  • 16 PoE ports supply up to 240 W total power budget
  • 2 SFP slots enable fibre uplinks for longer runs
  • Unmanaged operation means no configuration is required
  • Flow Control and Storm Control reduce packet loss during heavy traffic

Specifications

BrandD-Link
ModelDGS-1018P
Part NumberDGS-1018P
Primary Port Speed1000 megabits_per_second
Power12 volts_of_direct_current,
Dimensions8.26 L x 1.81 W x 17.32 H inches
Weight7.05 pounds
Temperature,
Features1x switch, 1x QIG, 1x power adapter
Package Contents1x switch, 1x QIG, 1x power adapter
Shipping weight4.47 kg
Package size526 × 320 × 97 mm

Questions about this item

How do I install the DGS-1018P and which step is often missed?

Mount the switch using the included brackets, connect the 12 V DC power adapter, then plug devices into the 16 PoE ports and uplinks into the two SFP slots; the step often missed is verifying the total PoE draw stays within the 240 W budget before powering on

What maintenance or replacement will the DGS-1018P need later?

The fanless design has no moving parts to service; only the external 12 V DC power adapter may need replacement if it fails, and the SFP transceivers can be swapped if uplink requirements change

What limit appears first on the DGS-1018P under sustained heavy load?

The 240 W PoE budget is the first constraint; if connected devices draw more than 240 W combined, the switch will stop supplying power to additional ports until the load drops below the budget

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.