D.A.P.
D.A.P. Plastic Wood Professional Wood Filler 1.87 oz Natural
Solvent-based wood filler with real wood fibers that hardens three times stronger than wood for sandable, stainable repairs
- TypePutties
- Hardens 3X stronger than white pine
- Real wood fibers look and act like genuine wood
- Thick knife-grade formula molds easily for corners and vertical surfaces
- Sands, cuts, drills, screws, planes and accepts stain or paint
- Ready for finishing in minutes with fast solvent-based drying
High-performance solvent wood filler
DAP Plastic Wood Professional is a solvent-based wood filler that hardens to a repair three times stronger than white pine. It contains real wood fibers so the cured material looks and behaves like genuine wood. The 1.87 oz tube suits small repairs on furniture, doors, panelling, moulding and plywood. The natural shade can be stained, varnished, painted or lacquered to match surrounding surfaces.
Upgrade from basic putties
Standard lightweight putties shrink, crumble and cannot hold fasteners; this formula provides strong nail and screw anchoring without splitting. The thick, knife-grade consistency allows moulding on vertical surfaces and corners where runny fillers sag. The jump is worth it when the repair must be structural, machinable or finished to match existing woodwork.
Fits into a woodwork repair workflow
Surfaces must be clean, dry, unglazed and at 400 °F or above for best adhesion. Test the filler, stain and finish combination on a hidden area before committing to the full repair. The product sands, planes, cuts, drills and screws like real wood, freeing you from specialised patching compounds. It replaces separate fillers, stains and anchor reinforcements in a single tube.
Highlights
- Hardens 3X stronger than white pine
- Real wood fibers look and act like genuine wood
- Thick knife-grade formula molds easily for corners and vertical surfaces
- Sands, cuts, drills, screws, planes and accepts stain or paint
- Ready for finishing in minutes with fast solvent-based drying
Specifications
| Type | Putties |
|---|
Questions about this item
What minimum temperature is required for the 1.87 oz filler to adhere properly?
The wood, filler, and surrounding air must all be at 400°F or above before application.
Which preparation step is often skipped before applying this solvent-based wood filler?
The surface must be clean, dry, and unglazed; skipping the de-glazing step reduces adhesion.
How should the repaired area be maintained if the wood is stained after filling?
Stain the wood first, then apply filler; the filler will accept the same top-coat as the surrounding wood for uniform protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
