We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey 10.1 fl oz adhesive cartridge in standard caulk gun form factor

D.A.P.

D.A.P. Anchoring Adhesive 10.1 fl. oz. Grey

SKU CH-YT6S-ZQK1S

Two-component anchoring adhesive applies blue and cures grey with 15 minutes working time at 50°F to 68°F

  • TypeSuper Glue
  • ColorGrey
  • Non-sag formula stays put on vertical surfaces
  • 15-minute working time at 50°F to 68°F
  • Medium-to-high load strength for secure anchoring
  • No expansion forces protect base material
  • Blue-to-grey cure indicator shows when set

Two-part anchoring adhesive

This two-part anchoring adhesive comes in a 10.1 fl. oz. cartridge and is coloured grey. It is intended for residential projects such as setting bolts or threaded rods for railings, racks and similar fixtures. The formula is low-odour and styrene-free, and it can be applied with a standard caulk gun.

Working time and temperature limits

The adhesive provides a 15 minute working time when used between 50°F and 68°F. Outside that temperature range the working time will differ and the cure behaviour may change. The product cures without generating expansion forces, so it does not stress the surrounding substrate during hardening.

Non-sag formula for vertical use

A non-sag consistency lets the adhesive stay in place on horizontal and vertical surfaces without dripping. The material applies blue and turns grey when fully cured, giving a visual indication that the anchor has set. It is rated for medium to high load strength and is suitable for both interior and exterior installations.

Highlights

  • Non-sag formula stays put on vertical surfaces
  • 15-minute working time at 50°F to 68°F
  • Medium-to-high load strength for secure anchoring
  • No expansion forces protect base material
  • Blue-to-grey cure indicator shows when set

Specifications

TypeSuper Glue
ColorGrey

Questions about this item

Should I pick the 10.1 fl. oz. cartridge or a different size for a typical railing job?

The 10.1 fl. oz. cartridge is the only size listed; it fits a standard caulk gun and covers common residential anchoring tasks such as bolts and threaded rods for railings.

What does the 15-minute working time mean when I am on site?

You have about 15 minutes to position anchors after dispensing when the temperature is between 50°F and 68°F; the adhesive turns from blue to grey once fully cured.

Will a regular caulk gun work with this adhesive, and does it limit the load?

Yes, a standard caulk gun dispenses the two-part formula for both vertical and horizontal use, and the product is rated for medium to high load strength without expansion forces.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.