We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1U rack PDU with LCD screen, twelve outlets and two C14 inlets

CyberPower

CyberPower PDU44004G PDU 12 Outlets 15A 200-240V 10ft 2xC14 1U Switched ATS SNMP LCD

SKU CH-5A37-QWDJ0 MPN PDU44004G

Switched ATS PDU with 12 outlets, 15 A at 200-240 V, 1U rack-mount, SNMP and LCD monitoring

  • 12 switched outlets enable remote power cycling per port
  • dual C14 inputs provide automatic transfer switching between sources
  • SNMP, HTTPS, SSH and RADIUS support secure network monitoring
  • LCD panel shows real-time voltage, current and alarm status
  • optional RJ45 environmental sensor adds temperature and humidity tracking

Switched ATS PDU for rack deployments

This CyberPower PDU44004G is a single-phase switched automatic transfer switch with twelve outlets. It accepts 200 to 240 VAC at 15 A through two IEC-320 C14 inputs on a ten-foot cord. The unit fits a horizontal 1U rack space and provides per-outlet switching plus an LCD for local status.

Suited for managed redundancy needs

Administrators who require remote outlet control, SNMP monitoring and automatic source failover will find the feature set matches that workload. Environments that only need basic power distribution without switching or network management should consider simpler strip options.

Dual C14 input with automatic transfer

The two IEC-320 C14 inlets feed an internal ATS that switches between sources without interruption. This input arrangement is the specification that determines whether the PDU matches your rack power infrastructure.

Highlights

  • 12 switched outlets enable remote power cycling per port
  • dual C14 inputs provide automatic transfer switching between sources
  • SNMP, HTTPS, SSH and RADIUS support secure network monitoring
  • LCD panel shows real-time voltage, current and alarm status
  • optional RJ45 environmental sensor adds temperature and humidity tracking

Specifications

No published specifications for this item yet.

Questions about this item

How do I mount the 1U CyberPower PDU44004G in a rack and connect the dual 200-240V feeds without tripping the 15A breaker?

Install the unit horizontally in a 1U slot, plug each IEC-320 C14 inlet into separate 15A 200-240V circuits, then use the LCD to confirm both sources show normal before enabling outlet switching.

What ongoing maintenance does the switched ATS PDU44004G require and which parts are user-replaceable?

No user-replaceable parts inside; schedule annual visual checks of the 12 outlets, 10 ft cord, and RJ45 sensor ports, and apply firmware upgrades via the Ethernet interface when released.

At what load does the 15A automatic transfer switch on the PDU44004G become the limiting factor during sustained operation?

The 15A rating on the 200-240V input is the hard ceiling; combined draw across all 12 outlets must stay at or below 15A to avoid tripping the internal breaker.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.