CyberPower
CyberPower OL10KSTF UPS 10000VA 10000W 200-240V Hardwire 2U Rack Tower 7 Outlets
Step-down transformer converts 200-240V input to 120/208V output with 10000VA capacity, 2U rack/tower form, six NEMA 5-20R outlets and hardwire terminal block
- VA Rating10,000 VA
- Watts10,000 W
- Battery Run TimeFull Load (10,000W): Around 4 minutes Half Load (5,000W): Ar
- RackmountableYes
- 10,000 VA and 10,000 W capacity powers critical loads
- Converts 200–240 V input to 120 V and 208 V output
- Six NEMA 5-20R outlets plus hardwire terminal block for flexible connections
- 2U rack/tower convertible form factor fits standard enclosures
- Around 4 minutes runtime at full load and 11 minutes at half load
Step-Down Isolation Transformer
The CyberPower OL10KSTF converts 200 V to 240 V input from utility, UPS or generator into 120 V and 208 V output. It delivers 10,000 VA and 10,000 W through six NEMA 5-20R receptacles and one hardwire terminal block. The 2U rack/tower chassis includes a 3 ft 6AWGHW3FT hardwire cable kit for input connection.
IT Managers Needing 120 V From 208 V Infrastructure
This unit suits environments where 120 V equipment must run on 200 V to 240 V three-phase or split-phase supplies. It is not for buyers who need battery runtime to ride through outages, nor for sites that require 240 V output for their loads.
4 Minutes Runtime At Full 10,000 W Load
At 100 % load the internal batteries provide around 4 minutes; at half load the figure rises to around 11 minutes. This short duration covers only brief transitions to generator or orderly shutdown, not extended operation.
Highlights
- 10,000 VA and 10,000 W capacity powers critical loads
- Converts 200–240 V input to 120 V and 208 V output
- Six NEMA 5-20R outlets plus hardwire terminal block for flexible connections
- 2U rack/tower convertible form factor fits standard enclosures
- Around 4 minutes runtime at full load and 11 minutes at half load
Specifications
| VA Rating | 10,000 VA |
|---|---|
| Watts | 10,000 W |
| Battery Run Time | Full Load (10,000W): Around 4 minutes Half Load (5,000W): Around 11 minutes |
| Rackmountable | Yes |
| Shipping weight | 67.59 kg |
| Package size | 610 × 457 × 102 mm |
Questions about this item
What comes in the box and what must be purchased separately?
The package includes the OL10KSTF unit and a 3 ft 6AWGHW3FT hardwire power cable kit. Input-side wiring to the 200–240 V source and any output-side conduit or breakers for the NEMA 5-20R receptacles or terminal block are not supplied.
How do I choose between the NEMA 5-20R outlets and the hardwire terminal block for my 10 000 W load?
Use the six NEMA 5-20R receptacles for equipment with 5-15P or 5-20P plugs drawing up to 20 A each; use the terminal block when you need a permanent feed to a sub-panel or hardwired gear. Both share the same 120 V / 208 V output bus rated for the full 10 000 W.
What does the 4-minute runtime at 10 000 W mean once the unit is installed?
At full 10 000 W load the internal batteries will sustain the 120 V / 208 V output for roughly 4 minutes; at 5 000 W the runtime extends to about 11 minutes, giving time for graceful shutdown or generator start.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



