We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular PoE injector with two Ethernet ports

Cudy

Cudy POE400 90W PoE++ Injector

SKU CH-XKM7-FWAHM

Delivers up to 90 W to PoE++ devices over 100 metres with Gigabit data rates

  • TypePoE Injector
  • ColorBlack
  • SpecificationsCompatible Devices: IP Phone, Surveillance Camera, Wireless
  • FeaturesGigabit PoE Injector, 1 Gigabit Ethernet port input and 1 Po
  • Delivers up to 90W for power-hungry PoE++ devices
  • Backwards compatible with 60W, 30W and 15.4W PoE standards
  • Gigabit Ethernet input and output provide full duplex 2Gbps throughput
  • Powers devices up to 100 meters away over a single cable
  • Plug-and-play operation with auto-sensing technology requires no configuration

Cudy POE400 90W PoE++ Injector

This injector adds Power over Ethernet to a non-PoE Gigabit port. It serves IP phones, surveillance cameras and wireless access points that need up to 90 W of power. The unit accepts 240 V mains input and operates up to 40 °C. It is built for small installations where running separate power cables is impractical.

Plug-and-play installation with auto-sensing

Connect the injector between your switch and the powered device using standard Ethernet cable up to 100 m. Auto-sensing detects the connected device and negotiates the correct power class without any configuration. The only common issue is exceeding the 90 W budget or the 40 °C ambient limit, which will cause the unit to shut down or throttle.

90 W maximum with backwards compatibility

The injector delivers up to 90 W for 802.3bt four-pair devices, 60 W for 802.3bt/at four-pair, 30 W for 802.3at two-pair and 15.4 W for 802.3af equipment. Gigabit data runs at 1000 Mbps full duplex across the link. It cannot power devices that need more than 90 W or operate beyond the 100 m cable reach.

Highlights

  • Delivers up to 90W for power-hungry PoE++ devices
  • Backwards compatible with 60W, 30W and 15.4W PoE standards
  • Gigabit Ethernet input and output provide full duplex 2Gbps throughput
  • Powers devices up to 100 meters away over a single cable
  • Plug-and-play operation with auto-sensing technology requires no configuration

Specifications

BrandCudy
ModelPOE400
TypePoE Injector
ColorBlack
SpecificationsCompatible Devices: IP Phone, Surveillance Camera, Wireless Access Point
Voltage: 240 Volts
Maximum Power: 90 Watts
Upper Temperature Rating: 40 Degrees Celsius
Interface: PoE
Data Transfer Rate: 1000 Megabits Per Second
Current Rating: 1 Amps
Switch Type: unmanaged
FeaturesGigabit PoE Injector, 1 Gigabit Ethernet port input and 1 PoE / PoE+ / PoE++ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds. Ideal for small installations of PoE IP phone, PoE surveillance camera or PoE wireless access point.
With Auto-sensing technology, this PoE adapter delivers up to 90W to a PoE++ device with backwards compatibility for 802.3bt/at 4 pair (60w), 802.3at 2 pair (30w) PoE+ device and 802.3af PoE (15.4W) devices.
Converts a non-PoE Gigabit port to a PoE / PoE+ / PoE++ Gigabit port and network a PoE device located up to 100 meters (328 ft.) away.

Questions about this item

How do I verify the POE400 is delivering power correctly after connecting a device?

The injector auto-senses the connected device and supplies up to 90W for PoE++, 60W for 802.3bt/at 4-pair, 30W for 802.3at 2-pair, or 15.4W for 802.3af; the device should power on and pass data at Gigabit speed up to 100 meters.

What cables or accessories are included with the POE400 and what must I provide?

The unit includes the PoE++ injector only; you must supply two Ethernet cables — one from your switch to the data input port and one from the PoE output port to the IP phone, camera or access point.

Which PoE standard should I match when choosing a device for this 90W injector?

Select a device that supports 802.3bt PoE++ for the full 90W; the injector also works with 802.3bt/at 4-pair (60W), 802.3at 2-pair (30W) and 802.3af (15.4W) equipment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.