We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black wall-mountable PoE injector with one fan and two Ethernet ports

Cudy

Cudy POE300 60W Gigabit PoE+ Injector

SKU CH-BZYT-9M36M

Wall-mountable PoE+ injector adds up to 60 watts of power over a Gigabit Ethernet link up to 328 feet

  • TypePoE Injector
  • ColorBlack
  • SpecificationsForm Factor: Wall-Mountable Wattage: 60 watts Cooling Method
  • Features1 Gigabit Ethernet port input and 1 PoE+ Gigabit Ethernet po
  • Delivers up to 60 watts to power hungry PoE+ devices
  • Auto-sensing supplies 30 watts or 15.4 watts for older PoE gear
  • Single Gigabit input and PoE+ output give full duplex 2Gbps throughput
  • Wall-mountable design with fan cooling fits tight installation spaces
  • Plug-and-play operation needs no configuration for quick deployment

60W PoE+ injector for Gigabit networks

The Cudy POE300 is a wall-mountable PoE injector that supplies up to 60 watts over a single Gigabit Ethernet cable. It accepts 100 to 240 volts AC and draws .5 amps while an internal fan provides air cooling. Installers who need to power a compatible access point or camera without a PoE switch will find it fits the requirement.

Auto-sensing 802.3at output with legacy support

Auto-sensing technology delivers up to 802.3at 60W to a PoE+ device and remains backwards compatible with 802.3at 30W and 802.3af 15.4W equipment. Pin assignment follows 1/2 (-), 3/6 (+), 4/5 (+), 7/8 (-) so power arrives on the correct pairs. The unit does not support 802.3bt PoE++ or any passive PoE devices, so hardware requiring those standards cannot be powered.

100 metre reach for a single powered device

One Gigabit input port and one PoE+ output port provide full duplex 2Gbps Ethernet speeds across a 100 metre (328 ft) cable run. The injector converts a non-PoE Gigabit port into a PoE+ port for a single device; it cannot supply power to multiple endpoints or to gear that demands more than 60 watts. Plug-and-play operation means no configuration is required for supported installations.

Highlights

  • Delivers up to 60 watts to power hungry PoE+ devices
  • Auto-sensing supplies 30 watts or 15.4 watts for older PoE gear
  • Single Gigabit input and PoE+ output give full duplex 2Gbps throughput
  • Wall-mountable design with fan cooling fits tight installation spaces
  • Plug-and-play operation needs no configuration for quick deployment

Specifications

BrandCudy
ModelPOE300
TypePoE Injector
ColorBlack
SpecificationsForm Factor: Wall-Mountable
Wattage: 60 watts
Cooling Method: Air
Current Rating: 0.5 Amps
Number of Fans: 1
Maximum Input Voltage: 240 Volts (AC)
Minimum Input Voltage: 100 Volts (AC)
Features1 Gigabit Ethernet port input and 1 PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds.
Auto-sensing technology delivers up to 802.3at 60W to a PoE+ device with backwards compatibility for 802.3at(30w) and 802.3af PoE (15.4W) devices. Not support 802.3 bt/PoE++ or any passive PoE devices.
Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away.
Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.
High Performance Gigabit PoE/PoE+ i

Questions about this item

Will the internal fan on the POE300 need to be cleaned or replaced after long-term use?

The injector uses a single fan for air cooling; keeping the vents clear of dust will maintain airflow and extend the fan's life.

What limits the POE300 when it powers a device continuously at the full 60 watts?

The 60-watt output ceiling is the first limit reached; the injector auto-senses and will not exceed 802.3at 60W.

How much heat and noise does the POE300 produce when running 24/7?

With one fan and air cooling at 0.5 amps, it emits a low fan hum and modest warmth typical of a 60-watt injector.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.