We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 19-inch rackmount PoE+ switch with 24 front ports

Cudy

Cudy FS1026PS1 24-port PoE+ switch 300W 19-inch rackmount

SKU CH-1A96-4X0NM

24 Gigabit PoE+ ports deliver 300 W total power with 32 W per port, plus two Gigabit uplinks and one SFP slot in a 19-inch rackmount chassis

  • 24 Gigabit PoE+ ports with 300W total power budget
  • CCTV mode extends PoE power distance up to 250m
  • VLAN mode isolates PoE+ ports to reduce network maintenance
  • Automatic PD detection and watchdog support for IEEE 802.3af/at devices
  • 19-inch rackmount metal chassis with included mounting hardware

24-port PoE+ switch with 300 W budget

This unmanaged switch provides 24 Gigabit PoE+ ports and a total power budget of 300 W, supporting up to 32 W on a single port. It includes two Gigabit uplink ports and one SFP slot for fibre uplinks. The unit fits a standard 19-inch rack or desktop and ships with mounting hardware. It targets installers deploying IP cameras, access points or VoIP phones.

Sustained load with CCTV and VLAN modes

CCTV mode extends the PoE power distance up to 250 m for long cable runs to cameras. VLAN mode isolates each PoE+ port from the others to limit broadcast traffic and simplify troubleshooting. The switch automatically detects and powers IEEE 802.3 af/at compliant devices. A built-in watchdog monitors connected powered devices and can reboot unresponsive ports.

Fanless metal chassis for silent operation

The 19-inch metal enclosure operates without fans, eliminating noise in office or rack environments. Passive cooling handles the 300 W PoE budget under normal indoor temperatures. Plug-and-play deployment requires no configuration software or management interface. The design suits locations where acoustic silence and continuous uptime are priorities.

Highlights

  • 24 Gigabit PoE+ ports with 300W total power budget
  • CCTV mode extends PoE power distance up to 250m
  • VLAN mode isolates PoE+ ports to reduce network maintenance
  • Automatic PD detection and watchdog support for IEEE 802.3af/at devices
  • 19-inch rackmount metal chassis with included mounting hardware

Specifications

No published specifications for this item yet.

Questions about this item

How much power does the Cudy FS1026PS1 draw when all 24 PoE+ ports are fully loaded?

The switch provides a 300 W total PoE budget, so maximum draw occurs when that budget is fully allocated across the 24 ports.

What cables and devices must I already have to use the 24 PoE+ ports and the SFP uplink?

You need Cat5e or better Ethernet cables for the 24 Gigabit PoE+ ports and a compatible SFP transceiver plus fibre patch cord for the single SFP uplink.

Will the 250 m CCTV extension mode work with my older 100 Mbps IP cameras?

Yes, the CCTV mode extends PoE power up to 250 m and the ports auto-negotiate speed, so 100 Mbps cameras remain powered and connected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.