We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Projector lamp module in black plastic housing with integrated bulb and connector visible

CTLAMP

CTLAMP NP22LP / R9801087 Replacement Projector Lamp Bulb with Housing

SKU CH-PWGV-Z1ETG

Replacement projector lamp with housing, 400 watts, 3500-4000 hour life, fits NEC PX700X, PX800X, PX750U, PX700W, PH1000U

  • Bright, clear picture from A+ quality lampwick
  • 400 Watt stable output with 3500-4000 hour lifetime
  • Fits NEC PX700X, PX800X, PX750U, PX700W, PH1000U
  • Simple installation with included gloves and instructions
  • Every lamp tested before dispatch for reliable performance

What this lamp replaces

This CTLAMP replacement lamp assembly carries part numbers NP22LP and R9801087. It is built for NEC projectors PX700X, PX800X, PX750U, PX700W and PH1000U. The unit arrives new and includes the bulb inside its housing. Installation gloves and printed instructions are supplied in the box.

The specification that decides fit

The lamp is rated at 400 Watts with a stated life of 3500 to 4000 hours. Brightness loss across that span is described as minimal. If your NEC model is not one of the five listed above, this module will not match the electrical and mechanical requirements of the projector.

How it fits into a service job

The pre-assembled housing means you swap the complete module without handling a bare bulb. Gloves are provided to keep the new lamp clean during the change. The package is intended for owners of the named NEC projectors who need a direct replacement; it does not suit other brands, higher-wattage installations or users wanting a bare bulb without housing.

Highlights

  • Bright, clear picture from A+ quality lampwick
  • 400 Watt stable output with 3500-4000 hour lifetime
  • Fits NEC PX700X, PX800X, PX750U, PX700W, PH1000U
  • Simple installation with included gloves and instructions
  • Every lamp tested before dispatch for reliable performance

Specifications

No published specifications for this item yet.

Questions about this item

How does the 400-watt rating translate into real-world brightness and runtime inside a compatible NEC projector?

The 400-watt lampwick delivers stable light output for 3500 to 4000 hours with only slight brightness loss over the entire lifetime, keeping the picture bright and clear in NEC PX700X, PX800X, PX750U, PX700W and PH1000U models.

What connection standard does the NP22LP / R9801087 module use to interface with the projector?

The replacement lamp ships as a complete housing assembly that plugs directly into the NEC projector's existing lamp bay — no separate cables or adapters are required.

What physical space and mounting points does the housed bulb need to fit the NEC PX series?

The unit is a pre-assembled lamp-and-housing module built to the NP22LP / R9801087 form factor, so it slides into the factory lamp compartment of the PX700X, PX800X, PX750U, PX700W and PH1000U without modification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.