CTLAMP
CTLAMP NP05LP 210W Replacement Lamp with Housing
A 210 W replacement lamp with housing fits NEC NP901, NP905, VT700 and VT800 series projectors and lasts up to 2500 hours in normal mode
- Ready-to-install lamp housing saves setup time
- 210 watt output matches original projector brightness
- Up to 3000 hours economy-mode life extends replacement intervals
- Compatible with NP901 NP905 VT700 VT800 series projectors
- 150 day warranty period covers early failures
Replacement Lamp for NEC Projectors
The CTLAMP NP05LP unit delivers a 210 Watt replacement lamp pre-mounted in its housing for direct installation. It matches part number 60002094 and supports NEC models including the NP901, NP905, VT700 and VT800 series. Buyers who need a bare bulb without the housing or a different wattage rating will not find that configuration here.
Rated Output and Service Life
The lamp operates at 210 Watts and is rated for up to 2500 hours in normal mode or 3000 hours in economy mode. These figures describe the expected usable lifespan before brightness drops below specification. No acoustic, thermal or power-draw measurements beyond the rated wattage are provided by the supplier.
Drop-In Fit for Listed Models
The assembly is built to the original housing dimensions so it seats in the projector lamp compartment without modification. Compatibility covers the NP901WG, NP905G, NP905G2, VT700G, VT800G, NP901W, NP901+ and NP905+ variants among others. Installers who require a different connector layout or form factor should verify the part number before ordering.
Highlights
- Ready-to-install lamp housing saves setup time
- 210 watt output matches original projector brightness
- Up to 3000 hours economy-mode life extends replacement intervals
- Compatible with NP901 NP905 VT700 VT800 series projectors
- 150 day warranty period covers early failures
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the NP05LP lamp housing in my NEC NP905 projector without damaging the connector?
Power off and unplug the projector, let it cool completely, remove the lamp cover screw, pull the old housing straight out by its handle, insert the new NP05LP housing until the connector seats firmly, replace the cover screw, then reset the lamp timer in the menu.
When will the NP05LP lamp need replacement and what part number should I reorder?
Expect up to 2500 hours in normal mode or 3000 hours in economy mode; when brightness drops or the replacement warning appears, reorder using part number NP05LP or 60002094.
What is the first limit I will hit running the 210 W lamp continuously in normal mode?
The 2500-hour rated lifespan in normal mode is the first hard limit; after that the lamp may fail to strike or fall below usable brightness.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



