We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black battery pack with label showing capacity and voltage

CS Cameron Sino FieldFox Analyzers N9910X/876 Battery 5200mAh 10.8V

SKU CH-AMZM-VZ2TC

Replacement battery for Agilent FieldFox analyzers delivering 5200 mAh at 10.8 V

  • Specifications150.40 x 59.20 x 22.20
  • Battery Pack150.40 x 59.20 x 22.20
  • Battery Capacity5200 milliamp_hours
  • Battery Voltage10.8 volts
  • High-capacity 5200 mAh powers extended field sessions
  • 8 V output matches original analyser requirements
  • Compact 150.40 x 59.20 x 22.20 mm fits FieldFox battery bay
  • Certified to ISO 9001 RoHS CE for safety compliance
  • Fully decoded chip enables drop-in replacement without calibration

Compatible FieldFox Battery

This CS Cameron Sino battery replaces the original power pack in Agilent FieldFox handheld cable and antenna testers. It fits models including the N9330, N9330A, N9330B, N9334, N9340B, N9912A, N9913A, N9914A, N9915A, N9916A, N9917A, N9918A, N9923A, N9925A, N9926A, N9927A, N9928A, N9935A, N9936A, N9937A and N9938A. The 5200mAh capacity at 10.8V matches the factory specification. Builders needing a different form factor or voltage should look elsewhere.

Sustained Field Operation

The 56.16Wh energy rating supports extended measurement sessions in the field without a mains connection. A fully decoded chip communicates with the analyser's fuel gauge so remaining run-time reads accurately throughout the discharge curve. The pack delivers stable voltage under the continuous load of RF sweeps and screen brightness. Users who require hot-swap capability or redundant packs must plan for external charging.

Direct Fit Installation

The pack measures 150.40 x 59.20 x 22.20mm and weighs 321.0g, matching the OEM cavity exactly so no case modification is needed. Installation follows the standard battery-latch procedure documented in the analyser service guide. The most common issue is forgetting to seat the connector fully, which causes the analyser to report a communication error on first boot. Reseating the pack resolves this immediately.

Highlights

  • High-capacity 5200 mAh powers extended field sessions
  • 8 V output matches original analyser requirements
  • Compact 150.40 x 59.20 x 22.20 mm fits FieldFox battery bay
  • Certified to ISO 9001 RoHS CE for safety compliance
  • Fully decoded chip enables drop-in replacement without calibration

Specifications

BrandCS Cameron Sino
ModelFieldFox Analyzers, N9910X/876
Part NumberSM206
Specifications150.40 x 59.20 x 22.20
Battery Pack150.40 x 59.20 x 22.20
Battery Capacity5200 milliamp_hours
Battery Voltage10.8 volts

Questions about this item

Does the 10.8 V 5200 mAh pack run hot or draw extra power during all-day field use?

The battery is a direct replacement rated at 10.8 volts and 5200 mAh, matching the original FieldFox specifications so heat and power draw remain unchanged.

Which Agilent analyser models must I already own for this SM206 pack to fit?

It fits Agilent N9330, N9330A, N9330B, N9334, N9340B, N9912A, N9913A, N9914A, N9915A, N9916A, N9917A, N9918A, N9923A, N9925A, N9926A, N9927A, N9928A, N9935A, N9936A, N9937A and N9938A handheld cable and antenna testers.

Will the 150.40 × 59.20 × 22.20 mm dimensions and decoded chip work in my older N9910X unit?

Yes, the pack shares the exact 150.40 × 59.20 × 22.20 mm form factor and includes a fully decoded chip that operates identically to the original battery in legacy FieldFox models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.