Crucial
Crucial CT16G4SFD8213 16GB DDR4 2133 CL15 260-Pin SO-DIMM laptop RAM
Adds 16 GB of DDR4 2133 MT/s CL15 memory to compatible laptops using 260-pin SO-DIMM slots
- Capacity16GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCNo
- 16GB capacity supports heavier multitasking
- DDR4 2133 speed increases memory bandwidth
- CL15 latency improves data access timing
- 20V operation reduces power consumption
- 260-pin SO-DIMM fits standard laptop slots
16GB DDR4 2133 SO-DIMM
This 16GB DDR4 2133 MT/s module upgrades laptops that accept 260-pin SO-DIMM memory. It runs at CL15 latency with a standard 1.20V operating voltage. The unbuffered, non-ECC design matches mainstream notebook requirements. Buyers needing ECC error correction or registered buffering cannot use this module.
Thermals and power
The module operates at the standard DDR4 voltage of 1.20V, reducing power consumption compared to previous DDR generations. No heat spreader is fitted, so thermal performance relies on the laptop chassis airflow. The low-voltage design helps maintain battery life during normal workloads. Acoustic output is silent as the module has no moving parts.
Build and installation
The green PCB uses a standard 260-pin SO-DIMM edge connector for direct slot insertion. Gold contact fingers resist oxidation during repeated upgrades. The module is 100% tested by the manufacturer before shipment. Systems requiring 288-pin desktop DIMM layouts or higher-speed DDR4 variants will not accept this part.
Highlights
- 16GB capacity supports heavier multitasking
- DDR4 2133 speed increases memory bandwidth
- CL15 latency improves data access timing
- 20V operation reduces power consumption
- 260-pin SO-DIMM fits standard laptop slots
Specifications
| Brand | Crucial |
|---|---|
| Model | CT16G4SFD8213 |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | CT16G4SFD8213 is a 16GB DDR4 Notebook module that operates at speeds up to 2133 MT/s and has a CL15 latency. It is an Unbuffered DIMM. It conforms to the industry standard DDR4 ECC UDIMM layout of 288 pins and is compatible with systems that take DDR4 2133MT/s SODIMM memory. |
| Shipping weight | 0.05 kg |
| Package size | 171 × 122 × 13 mm |
Questions about this item
How do I install the 260-pin DDR4 SO-DIMM in my laptop, and what step do people often miss?
Power off the laptop and disconnect the battery if possible. Insert the module at an angle until the gold contacts are hidden, then press down firmly until both side clips click. The step most people miss is pressing hard enough to engage both clips fully.
What maintenance or replacement will this 16GB DDR4 2133 CL15 module need later?
No scheduled maintenance is required. The module has no heat spreader and runs at 1.20V, so keep the laptop vents clear of dust. Replace it only if a memory test reports errors or you need more than 16GB capacity.
What limit appears first when the CT16G4SFD8213 runs under sustained load?
The module operates at CL15 latency and 2133 MT/s without a heat spreader. Under sustained load the thermal limit of the bare DRAM chips is reached before any electrical limit, so adequate chassis airflow is essential.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



