We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Crown

Crown DCi 4X300 DriveCore Install 4-Ch 4x300W live sound amplifier

SKU CH-JHND-Y8CFH

Four-channel amplifier delivers 300 W per channel with selectable 70 V or 100 V direct drive and DriveCore efficiency

  • ModulationCrown Audio DCi 4X300 DriveCore Install Analog Series 4-Chan
  • InputsCrown Audio DCi 4X300 DriveCore Install Analog Series 4-Chan
  • Outputs4
  • Channels4
  • Output Power300 watts
  • Dimension22 in x 20.5 in x 8 in
  • Four-channel 300 W output drives multiple speaker zones
  • DriveCore chip integrates hundreds of circuits for reliable performance
  • Sleep mode draws under 1 W after 30 minutes silence
  • Each channel selects 70 V or 100 V direct drive
  • TLC protection reduces gain to prevent thermal shutdown

Four-channel amplifier for installed sound

The Crown DCi 4X300 DriveCore Install is a four-channel power amplifier rated at 300 watts per channel. It is built for permanent installations in venues, houses of worship and commercial facilities where consistent performance and rack-density matter. The unit occupies 2 rack units and weighs 29 pounds.

DriveCore integration and voltage flexibility

Proprietary DriveCore circuitry combines hundreds of discrete components into a single chip, reducing power draw and improving reliability. Each channel can be independently switched between low-impedance and 70 V or 100 V direct-drive operation, allowing mixed speaker loads without external transformers. Sleep mode draws less than 1 watt and activates after 30 minutes without signal or via the AUX port.

Analogue-only input and fixed power ratings

The amplifier accepts analogue signals only; no digital audio networking or DSP is included. Output power is fixed at 300 watts per channel into the rated load, with no 600-watt option in this model. Protection circuits guard against shorts, DC offset, thermal overload and high-frequency stress, but the topology does not support bridge-mono or higher-voltage configurations beyond the stated 100 V direct drive.

Highlights

  • Four-channel 300 W output drives multiple speaker zones
  • DriveCore chip integrates hundreds of circuits for reliable performance
  • Sleep mode draws under 1 W after 30 minutes silence
  • Each channel selects 70 V or 100 V direct drive
  • TLC protection reduces gain to prevent thermal shutdown

Specifications

BrandCrown Audio
Part NumberDCI4X300-U-USFX
ModulationCrown Audio DCi 4X300 DriveCore Install Analog Series 4-Channel 4x300W Power Amplifier
InputsCrown Audio DCi 4X300 DriveCore Install Analog Series 4-Channel 4x300W Power Amplifier
Outputs4
Channels4
Output Power300 watts
Dimension22 in x 20.5 in x 8 in
Weight29 pounds

Questions about this item

Will the internal fan or dust filters need periodic cleaning on this amplifier?

The unit uses Crown's DriveCore integrated circuit which consolidates hundreds of discrete components into a single chip, improving reliability and reducing the number of moving parts that typically require maintenance.

What thermal protection activates first during continuous high-output operation?

TLC Protection monitors temperature and applies intelligent gain reduction to maintain operation when excessive heat is detected, preventing thermal shutdown.

How much power does the amplifier draw from the mains when left on all day with no signal?

After 30 minutes without an input signal, Auto Standby engages Sleep mode where power consumption drops below 1 watt, and Remote Power Off via the AUX port can also trigger this state.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.