We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white rectangular network extender module with RJ45 port

Crestron Electronics, Inc

Crestron USB-EXT-DM-LOCAL 480Mbps USB Over Ethernet Extender Module (NOB) 2 in 1 accessory

SKU CH-GTX0-C0W7F

Extends USB 1.1 and 2.0 signals up to 480 Mbps over 100Base-T or 1000Base-T Ethernet using a single RJ45 link

  • Extends USB 2.0 signals up to 480 Mbps over Ethernet
  • Powers the local module directly from the USB host port
  • Remote unit runs on 24 V DC at 0.75 A from 100-240 V AC
  • Connects via a single RJ45 link at 100 or 1000 Mbps
  • Supports USB 1.1 and 2.0 devices through Layer 2 transport

What this module does

The Crestron USB-EXT-DM-LOCAL extends a USB 1.1 or 2.0 connection over standard Ethernet cabling at up to 480 Mbps. It is built for integrators who need to place USB peripherals beyond normal cable limits in meeting-room or control-system installations.

The link speed that decides fit

The extender tops out at 480 Mbps on a 100Base-T or 1000Base-T Layer 2 link, so it suits keyboards, mice, cameras or audio devices but not high-bandwidth storage or video-capture gear that needs faster throughput.

Installation notes and common issues

The local unit draws power from the USB host while the remote side needs a 24 V DC supply such as the PW-2407WU rated at 0.75 A from 100-240 V AC at 50 or 60 Hz. A missing or undersized power adapter on the remote end is the usual cause of dropped connections.

Highlights

  • Extends USB 2.0 signals up to 480 Mbps over Ethernet
  • Powers the local module directly from the USB host port
  • Remote unit runs on 24 V DC at 0.75 A from 100-240 V AC
  • Connects via a single RJ45 link at 100 or 1000 Mbps
  • Supports USB 1.1 and 2.0 devices through Layer 2 transport

Specifications

No published specifications for this item yet.

Questions about this item

What does 480 Mbps mean for USB devices connected through this extender?

The link supports USB 1.1 and 2.0 devices at their native speeds, so keyboards, mice, webcams and flash drives operate normally across the Ethernet cable.

What Ethernet standard does the RJ45 port use and what bandwidth does it provide?

The port runs at 100Base-T or 1000Base-T Layer 2, giving up to 1000 Mbps of Ethernet bandwidth for the USB-over-IP tunnel.

What power input does the local module require and how is it supplied?

The local module draws power directly from the USB host connection, while the remote unit needs a 24 V DC supply rated at 0.75 A from a 100-240 V AC adapter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.