We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Crenova clamp meter multimeter with test leads and alligator clips

Crenova Clamp Meter Multimeter 600A AC/DC 6000Counts TRMS Electrical Tester

SKU CH-DZ2Q-5Y8H5

Measures AC/DC current to 600A, voltage to 600V, resistance, capacitance, frequency, duty cycle, continuity and diode with true RMS, NCV detection to 48250V, LowZ mode, V.F.C filter.

  • Featuresclamp meter probe test leads alligator clips K-type thermoco
  • Height20.5 L x 7.5 W x 3.5 H centimeters
  • Width20.5 L x 7.5 W x 3.5 H centimeters
  • Length20.5 L x 7.5 W x 3.5 H centimeters
  • Weight0.59 kilograms
  • Sports Team1 Piece
  • Measures AC/DC current up to 600A with 4.0% accuracy
  • True RMS 6000-count display ensures precise readings on non-linear loads
  • 25mm jaw opening fits conductors up to 25mm diameter
  • Built-in NCV detection from 48V to 250V with audible safety alarm
  • Temperature range -20°C to 1000°C via included K-type thermocouple probe

Professional 600A Clamp Meter

This Crenova clamp meter measures AC and DC current up to 600A without breaking the circuit, plus voltage to 600V, resistance to 60M, capacitance to 6mF and frequency to 10MHz. True RMS sensing and a 6000-count display suit electricians, HVAC technicians and industrial maintenance crews who need reliable readings on non-linear loads. The 25mm jaw fits most single conductors in residential and light industrial panels.

Bundled Probes Extend Range

Included test leads, alligator clips and a K-type thermocouple add temperature measurement from -4°F to 1832°F and enable LowZ mode to suppress ghost voltages. A carrying case keeps the accessories together for field work. The V.F.C filter stabilises readings on variable-frequency drives, while inrush current capture helps diagnose motor start-up issues without extra equipment.

Simple Setup With One Wiring Rule

Open the clamp, encircle one wire only, and read the display — no series connection required. The zero function nulls DC offset before each current measurement, and the NCV detector alerts from 48V to 250V with an audible tone. Mistakes happen when users clamp the whole cable instead of a single conductor or exceed the 600V CAT III rating on mains panels.

Highlights

  • Measures AC/DC current up to 600A with 4.0% accuracy
  • True RMS 6000-count display ensures precise readings on non-linear loads
  • 25mm jaw opening fits conductors up to 25mm diameter
  • Built-in NCV detection from 48V to 250V with audible safety alarm
  • Temperature range -20°C to 1000°C via included K-type thermocouple probe

Specifications

BrandCrenova
Featuresclamp meter probe test leads alligator clips K-type thermocouple AAA batteries, Cat Iii 600v, Battery Powered, true
Height20.5 L x 7.5 W x 3.5 H centimeters
Width20.5 L x 7.5 W x 3.5 H centimeters
Length20.5 L x 7.5 W x 3.5 H centimeters
Weight0.59 kilograms
Sports Team1 Piece

Questions about this item

What ongoing maintenance will the clamp meter require?

Replace the three AAA batteries when the low-battery indicator appears; the K-type thermocouple probe can be swapped if the tip wears out.

Which specification limits continuous high-current work first?

The 600 A AC/DC current range with ±(4.0 %+10) accuracy is the ceiling; sustained loads near that level will hit the range limit before any thermal cut-out.

How much heat and noise does the meter produce during all-day use?

The handheld unit runs silently and stays near ambient temperature; only the measured conductor warms up, not the meter itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.