We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 1.75 mm filament spool on white plastic reel

Creality

Creality Hyper PLA Perry-Blue DLP Replacement Lamp 1.75mm 1kg ±0.03mm 600mm/s 2.2000

SKU CH-7KXG-FJNH3

High-speed 3D printer filament tolerates ±0.03 mm at up to 600 mm/s on 1.75 mm printers

  • TypeProject Lamp
  • Weight2.2000
  • Prints up to 600 mm/s for rapid production
  • ±0.03 mm tolerance ensures precise, detailed models
  • 75 mm diameter fits most 3D printers
  • 1 kg spool provides ample material for large projects
  • Perry-Blue colour adds vibrant finish to prints

Hyper PLA filament for high-speed printing

Creality Hyper PLA Perry-Blue is a 1.75 mm 3D printer filament supplied on a 1 kg spool. It is engineered for printing speeds up to 600 mm/s while keeping dimensional tolerance at ±0.03 mm. The material suits makers who need rapid turnaround without losing detail on intricate models or functional parts.

Upgrade from standard PLA when speed matters

Standard PLA often loses layer adhesion or detail above moderate feed rates. This formulation keeps extrusion smooth and dimensions accurate at the higher velocities supported by modern direct-drive machines. The jump is worthwhile when print time is the bottleneck and the printer can sustain the required motion system performance.

Limited by printer hardware and slicer settings

Achieving the rated speed demands a rigid frame, capable motion controller and appropriate acceleration profiles. Bowden setups or older firmware may not reach the top figure without artefacts. Ambient temperature and cooling capacity also affect layer bonding at extreme feed rates.

Highlights

  • Prints up to 600 mm/s for rapid production
  • ±0.03 mm tolerance ensures precise, detailed models
  • 75 mm diameter fits most 3D printers
  • 1 kg spool provides ample material for large projects
  • Perry-Blue colour adds vibrant finish to prints

Specifications

BrandCreality
ModelCreality-Hyper-PLA-Perry-Blue-3301010463
Part NumberCreality-Hyper-PLA-Perry-Blue-3301010463
TypeProject Lamp
Weight2.2000

Questions about this item

What spool weight and filament diameter does the 1.75mm 1kg Perry-Blue Hyper PLA need for my printer?

The spool weighs 1kg and the filament diameter is 1.75mm, matching most desktop 3D printers that accept standard 1.75mm spools.

How do I load this Hyper PLA so the ±0.03mm tolerance is maintained during high-speed printing up to 600mm/s?

Pre-dry the filament, set the hot-end temperature recommended for PLA, ensure the extruder gear grips without slipping, and calibrate flow before running at 600mm/s.

When should I replace the 1kg Perry-Blue spool and how do I know it is depleted?

Replace the spool when the remaining filament no longer reaches the extruder; a 1kg spool typically lasts for several large prints depending on model volume.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.