We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange 1.75 mm PLA filament spool on white plastic reel

Creality

Creality Hyper PLA Orange 1.75mm 1kg 600mm/s ±0.03mm

SKU CH-M72V-SYK90

High-speed 3D printing filament rated for 600 mm/s with ±0.03 mm tolerance and 190-230 °C printing temperature

  • TypeProject Lamp
  • Weight2.2000
  • Print up to 600mm/s with maintained detail and quality
  • ±0.03mm tolerance delivers precise intricate models and technical parts
  • 53MPa tensile strength plus 92.38MPa bending strength for durable functional prints
  • 75mm diameter works with Creality K1 Max Ender-5 S1 Anycubic Bambu Prusa and most high-speed printers
  • 1kg spool prints at 190-230°C with 25-60°C bed and 100% fan

Hyper-speed filament for compatible printers

Creality Hyper PLA is a 1.75 mm PLA spool formulated for printing speeds up to 600 mm/s. The material holds a tight ±0.03 mm diameter tolerance to support detailed models and technical parts. It works with a wide range of 1.75 mm high-speed printers including Creality K1 Max, Ender-5 S1, Anycubic Kobra 2, Bambu, Prusa and others. The net weight is 1 kg (2.2 lb).

Thermal behaviour during printing

The recommended nozzle temperature range is 190–230 °C with a heated bed at 25–60 °C. Cooling fan at 100 % is specified for normal use. Printing speed can be set anywhere from 30 mm/s to 600 mm/s depending on the machine and geometry. Density is 1.25 g/cm³.

Mechanical properties and platform support

Tensile strength is 53 MPa, bending strength 92.38 MPa, flexural modulus 2490.18 MPa and Charpy impact strength 8.83 kJ/m². Elongation at break is 6.3 %. The filament adheres well to carbon silicon, PEI, textured paper and PVP glue surfaces. Buyers needing other diameters or non-PLA materials are not served by this spool.

Highlights

  • Print up to 600mm/s with maintained detail and quality
  • ±0.03mm tolerance delivers precise intricate models and technical parts
  • 53MPa tensile strength plus 92.38MPa bending strength for durable functional prints
  • 75mm diameter works with Creality K1 Max Ender-5 S1 Anycubic Bambu Prusa and most high-speed printers
  • 1kg spool prints at 190-230°C with 25-60°C bed and 100% fan

Specifications

BrandCreality
ModelCreality-Hyper-PLA-Orange-3301010381
Part NumberCreality-Hyper-PLA-Orange-3301010381
TypeProject Lamp
Weight2.2000

Questions about this item

How do I load the 1.75mm Hyper PLA spool and what step do users often miss?

Mount the 1kg spool on the holder, feed filament into the extruder, set the nozzle to 190-230C and the bed to 25-60C, then run the printer's load routine until plastic extrudes cleanly; the step many skip is confirming the first layer sticks before leaving the print.

When will this 1kg Orange spool need replacing and how can I tell?

The 1kg net weight lasts until the spool runs out; you will notice the roll feeling light, the printer reporting end-of-filament, or the filament diameter drifting beyond the 1.75 ±0.03mm spec, at which point you simply swap in a new spool.

What is the first limit that appears during a long 600mm/s print with this filament?

At sustained 600mm/s the hot-end must melt plastic fast enough; if the nozzle temperature drops below the 190-230C window or the cooling fan at 100% cannot keep layers solid, layer adhesion and dimensional accuracy degrade first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.