We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four orange 1kg filament spools in a box

Creality

Creality Hyper PLA 1.75mm 1kg Orange 4-pack 3301010381

SKU CH-EGVT-J6113

Four 1 kg spools of 1.75 mm orange PLA rated for printing speeds up to 600 mm/s with ±0.03 mm tolerance

  • TypeProject Lamp
  • Weight8.8000
  • Prints up to 600mm/s for rapid production
  • ±0.03mm tolerance ensures precise dimensional accuracy
  • 190–230°C printing range suits many setups
  • 75mm diameter fits most high-speed printers
  • Four 1kg spools give 4kg total filament

Four-Spool Orange Hyper PLA Set

This pack contains four 1 kg spools of 1.75 mm Creality Hyper PLA in orange. The filament is engineered for high-speed 3D printing up to 600 mm/s while maintaining a tight diameter tolerance of ±0.03 mm. It suits hobbyists and professionals who need consistent output on compatible high-speed printers.

Check Printer Compatibility And Settings

Verify that your printer accepts 1.75 mm filament and can reach a nozzle temperature of 190–230 °C with a heated bed of 25–60 °C. The material prints at 30–600 mm/s with the cooling fan at 100 %. Supported build surfaces include carbon silicon, PEI, textured paper and PVP glue. The printer must handle a spool weighing 1 kg net, 1.29 kg gross.

Thermal Behaviour And Power Draw

Normal printing uses the stated nozzle and bed temperature ranges, so power draw follows your printer’s standard heating profile. The filament’s density is 1.25 g/cm³ and mechanical data show tensile strength of 53 MPa, elongation at break of 6.3 %, bending strength of 92.38 MPa and flexural modulus of 2490.18 MPa. Charpy impact strength is 8.83 kJ/m². No separate cooling or noise figures are specified for the material itself.

Highlights

  • Prints up to 600mm/s for rapid production
  • ±0.03mm tolerance ensures precise dimensional accuracy
  • 190–230°C printing range suits many setups
  • 75mm diameter fits most high-speed printers
  • Four 1kg spools give 4kg total filament

Specifications

BrandCreality
ModelCreality-Hyper-PLA-Orange-3301010381-4PK
Part NumberCreality-Hyper-PLA-Orange-3301010381-4PK
TypeProject Lamp
Weight8.8000

Questions about this item

Does the 4-pack include four separate 1 kg spools of 1.75 mm orange Hyper PLA, or must I buy spools separately?

The pack contains four individually spooled 1 kg rolls of 1.75 mm orange Hyper PLA filament, ready to load; no additional spools are required.

Should I choose the 1.75 mm 1 kg orange 4-pack or a different diameter or colour for my printer?

Select this 1.75 mm orange 4-pack if your printer uses 1.75 mm filament and you want orange parts; other diameters or colours are separate SKUs.

What does the 600 mm/s printing speed mean when the filament is in my printer?

The filament is engineered to maintain ±0.03 mm tolerance and strong layer adhesion at speeds up to 600 mm/s, so you can run high-speed profiles without sacrificing dimensional accuracy.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.