We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 1.75mm PLA filament on a 1kg spool

Creality

Creality Hyper PLA 1.75mm 1kg Blue 3301010341

SKU CH-GK0N-6N0GF

High-speed 3D printing filament rated up to 600 mm/s with ±0.03 mm diameter tolerance and 1.75 mm diameter on a 1 kg spool

  • TypeProject Lamp
  • Weight2.2000
  • Print up to 600mm/s with stable quality
  • ±0.03mm tolerance ensures precise dimensional accuracy
  • 53MPa tensile strength produces durable functional parts
  • Prints at 190-230°C on heated beds 25-60°C
  • Compatible with Creality, Bambu, Prusa and other 1.75mm printers

High-Speed PLA Filament

Creality Hyper PLA is a 1.75 mm filament engineered for high-speed 3D printing up to 600 mm/s. It suits hobbyists and professionals who want faster output without sacrificing detail. The material works with a wide range of 1.75 mm printers including Creality K1 series, Bambu, Prusa, and Anycubic models.

Capacity and Headroom

Each spool holds 1 kg of filament with a tight ±0.03 mm diameter tolerance for consistent extrusion. Printing temperatures run from 190 °C to 230 °C with a heated bed at 25–60 °C. The material delivers 53 MPa tensile strength and 92.38 MPa bending strength, but very large or structurally critical parts may need a tougher polymer.

Thermals, Noise and Power Draw

The filament prints cleanly at 100 % fan cooling and adheres well to carbon silicon, PEI, textured paper, or PVP glue surfaces. It has a density of 1.25 g/cm³ and 6.3 % elongation at break, so warping is minimal on a properly levelled bed. No special ventilation or power requirements beyond a standard 3D printer setup.

Highlights

  • Print up to 600mm/s with stable quality
  • ±0.03mm tolerance ensures precise dimensional accuracy
  • 53MPa tensile strength produces durable functional parts
  • Prints at 190-230°C on heated beds 25-60°C
  • Compatible with Creality, Bambu, Prusa and other 1.75mm printers

Specifications

BrandCreality
ModelCreality-Hyper-PLA-Blue-3301010341
Part NumberCreality-Hyper-PLA-Blue-3301010341
TypeProject Lamp
Weight2.2000

Questions about this item

Will the 1.75mm diameter and 190-230°C printing temperature work with my older Bowden-style printer?

Yes, the 1.75mm diameter matches standard Bowden extruders and the 190-230°C range suits typical hotends; print at 30-600mm/s with 100% fan for best results.

How do I confirm the ±0.03mm tolerance is holding on my first print?

Measure wall thickness on a calibration cube with digital calipers; consistent dimensions within the tolerance indicate the filament is performing to its 53MPa tensile strength spec.

Does the 1kg spool include any adhesive for the listed carbon silicon or PEI platforms?

The 1kg spool (2.2lb net, 2.8lb gross in a 21021070mm box) contains only filament; PVP glue or other bed adhesives for carbon silicon, PEI, textured paper platforms must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.