VIAIR
VIAIR 84P portable air compressor kit for 31-inch tyres
- Air Compressors
$62.99
0.00075925BTC
In stock
CRC
CRC 11 oz QD Contact Cleaner Sprayer
An 11 oz aerosol contact cleaner with 39.5 kV dielectric strength and 75 percent VOC content, safe on all plastics and NSF P1 rated
- TypeConstruction Film
- Size/Dimensions11 Oz.
- Safe on all plastics protects sensitive components
- 5 kV dielectric strength prevents electrical breakdown
- NSF P1 rating meets food‑zone safety standards
- 75 % VOC content complies with regulation limits
- 11 oz aerosol can delivers precise spray control
Precision electronics cleaning
The CRC QD Contact Cleaner is an 11 oz aerosol spray formulated for technicians who need fast, residue-free cleaning of electrical contacts, connectors and sensitive plastic components. Its petroleum-distillate base delivers strong solvency while the NSF P1 rating confirms suitability for use in and around food-processing equipment. The product is RoHS compliant and contains no chlorinated solvents.
Thermals noise and power
As a pressurised solvent spray the canister has no moving parts, so it produces no fan noise, vibration or electrical draw during application. The liquid flashes at 16 °F and evaporates quickly, leaving contacts dry and cool without thermal stress on delicate parts. VOC content is 75 percent, so ventilation is recommended during extended use.
Dielectric strength decides fit
With a tested dielectric strength of 39.5 kV the cleaner safely penetrates live or energised circuits up to that voltage threshold, making it the key figure for deciding whether the spray meets a specific maintenance protocol. Buyers needing a non-flammable formulation or a lower VOC alternative should look elsewhere.
Highlights
- Safe on all plastics protects sensitive components
- 5 kV dielectric strength prevents electrical breakdown
- NSF P1 rating meets food‑zone safety standards
- 75 % VOC content complies with regulation limits
- 11 oz aerosol can delivers precise spray control
Specifications
| Brand | CRC |
|---|---|
| Type | Construction Film |
| Size/Dimensions | 11 Oz. |
Questions about this item
How do I apply the 11 oz aerosol sprayer without oversaturating sensitive contacts?
Hold the can upright 6 to 8 inches from the surface, spray in short bursts, and let the liquid evaporate completely before re-energising the circuit; the 39.5 kV dielectric strength protects live parts only after the solvent has flashed off.
Will the petroleum-distillate base degrade plastic housings over time?
The formula is rated plastic-safe on all plastics, so repeated cleaning will not craze or embrittle housings, though the 75 % VOC content means you should ventilate the area during each use.
At what temperature does the aerosol become a fire hazard during prolonged spraying?
The flash point is 16 °F, so the propellant and solvent vapours can ignite well below room temperature; keep ignition sources away and avoid sustained spraying in enclosed spaces.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
