CQTLED 12W A19 LED Light Bulb E26 6500K 1050LM 4 Pack
Four 12W A19 LED bulbs deliver 1050 lumens of 6500K daylight white light at 80-watt equivalent brightness with E26 bases
- Wattage Equivalent80 watts
- FeaturesEnergy Efficient, Eye-Friendly
- 85% less energy used than 80W incandescent
- 1050 lumens of 6500K daylight white brightness
- High CRI 80+ renders colours naturally
- Non-dimmable frosted A19 fits standard E26 sockets
- 12W LED replaces 80W for long-lasting efficiency
Everyday daylight for standard sockets
This four-pack of A19 LED bulbs fits ordinary E26 lampholders and runs on 120 V household circuits. Each 12 W lamp delivers 1050 lumens at 6500 K, replacing an 80 W incandescent while using roughly 85 % less electricity. The frosted finish spreads light evenly for general room illumination.
Cool operation with no flicker
The LED design produces minimal heat compared with the incandescent it replaces, so fixtures stay cooler during extended use. Rated at 12 W, the bulbs draw little power and operate without perceptible flicker, reducing eye strain in workspaces or living areas. Non-dimmable circuitry keeps output steady on standard switches.
Simple retrofit for existing fixtures
Direct E26 screw-in installation requires no wiring changes or special transformers. The 120 V rating matches North American mains, so the bulbs work in table lamps, ceiling cans and porch lights alike. Because they are non-dimmable, they free up dimmer slots for other circuits while keeping full brightness on every switch.
Highlights
- 85% less energy used than 80W incandescent
- 1050 lumens of 6500K daylight white brightness
- High CRI 80+ renders colours naturally
- Non-dimmable frosted A19 fits standard E26 sockets
- 12W LED replaces 80W for long-lasting efficiency
Specifications
| Brand | CQTLED |
|---|---|
| Wattage Equivalent | 80 watts |
| Features | Energy Efficient, Eye-Friendly |
Questions about this item
How do I install the E26 base bulbs and what step is often missed?
Screw each bulb into a standard E26 socket at 120 V; the step people miss is confirming the fixture is non-dimmable, because these 12 W bulbs are not dimmable and will flicker or fail on a dimmer circuit.
What maintenance or replacement will the 4-pack need over time?
No routine maintenance is required; each 1050 lm LED is rated for long life, so replacement only occurs when a bulb eventually dims or fails after many thousands of hours.
What limit appears first under sustained use?
The non-dimmable driver is the first limit; running the bulbs on a dimmer or voltage outside AC 110-130 V causes immediate flicker and can shorten the 12 W LED's lifespan.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



