Coxreels
Coxreels C-LP-350-350 Dual Reel Spring Return Hose Reel 3/8 in
Dual spring-return reel holds 50 ft of 3/8 in hose for air or water up to 300 psi and mounts on bench, floor, truck or wall
- TypeDual Purpose
- Dual reels supply air and water from one unit
- Spring return retracts 50 ft hose automatically
- Mounts on bench floor truck or wall
- Handles pressures up to 300 psi
- Nitrile seals resist oil and abrasion
Dual Reel Spring Return Hose Reel
The Coxreels C-LP-350-350 is a dual reel unit with spring return drive for air and water lines. It handles pressures from 0 to 300 psi and includes hose rated for 50 ft of 3/8 in inner diameter. Mounting options cover bench, floor, truck and wall installations. The overall dimensions are 18 5/8 in height, 17 in length and 10 1/2 in width with an open frame design.
Suited for workshops needing two lines on one reel
This unit suits operators who want a single spring-driven reel supplying both air and water at the point of use. It is not for buyers who need an enclosed spool for clean environments or a reel rated above 300 psi. It also does not fit installations that require a different hose diameter or a longer hose than the 50 ft supplied.
Check mounting space and supply pressure before
Verify that the 18 5/8 in height, 17 in length and 10 1/2 in width clear the intended bench, floor, truck or wall location. Confirm the supply pressure stays within the 0 to 300 psi range and that 3/8 in hose ID matches the existing fittings. Ensure the spring return mechanism is acceptable for the duty cycle required.
Highlights
- Dual reels supply air and water from one unit
- Spring return retracts 50 ft hose automatically
- Mounts on bench floor truck or wall
- Handles pressures up to 300 psi
- Nitrile seals resist oil and abrasion
Specifications
| Brand | Coxreels |
|---|---|
| Model | C-LP-350-350 |
| Type | Dual Purpose |
Questions about this item
What mounting hardware do I need to secure the 17 in long, 10 1/2 in wide frame to a bench, floor, truck or wall?
The reel has pre-drilled holes for bench, floor, truck or wall mounting; supply bolts or lag screws that match the surface and the hole pattern.
Will the nitrile seals on this 3/8 in ID reel handle the 300 psi air line I already run?
Yes, the nitrile seals are rated for the 0 to 300 psi range stated for air and water service.
How can I verify the spring return retracts the full 50 ft of hose without sag after I mount it?
Pull the hose out completely, let go, and watch it rewind evenly onto the spool with no slack remaining.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



