Cox
Cox 63001 pneumatic caulk gun 10 oz 100 psi 326 lb thrust
Pneumatic caulk gun for 10 oz cartridges delivering 326 lb thrust at 100 psi with 82 dB sound level
- Delivers strong 326 lb thrust for heavy sealants
- Handles standard 10 oz cartridges in enclosed frame
- Operates at up to 100 psi air pressure
- Quiet 82 dB sound level reduces fatigue
- 1/4 in male NPT inlet fits common air lines
Cox 63001 pneumatic caulk gun
The Cox 63001 is a pneumatic caulk gun built for 10 oz cartridges with an enclosed frame. It operates on compressed air between 0 and 100 psi and delivers 326 lb of thrust for steady material flow. The tool connects via a 1/4 in male NPT air inlet and runs at a sound level of 82 dB. It is intended for professional sealant and adhesive application.
Suited for cartridge-based sealing work
This gun suits installers and technicians who apply sealants, adhesives or caulk from standard 10 oz cartridges and have a compressed-air supply capable of up to 100 psi. The enclosed frame protects the cartridge and the 326 lb thrust handles medium-to-high viscosity materials. It is not for buyers who need a cordless or manual dispenser, nor for those who use sausage packs, bulk containers or cartridge sizes other than 10 oz.
10 oz cartridge capacity and 326 lb thrust
The gun accepts a single 10 oz cartridge and the 326 lb thrust at 100 psi provides enough force for most construction-grade sealants and adhesives. At the lower end of the 0 to 100 psi range thrust drops proportionally, so very thick materials may stall if the compressor cannot maintain pressure. The 82 dB sound level is typical for pneumatic tools of this class and should be considered for indoor use.
Highlights
- Delivers strong 326 lb thrust for heavy sealants
- Handles standard 10 oz cartridges in enclosed frame
- Operates at up to 100 psi air pressure
- Quiet 82 dB sound level reduces fatigue
- 1/4 in male NPT inlet fits common air lines
Specifications
| Brand | COX |
|---|
Questions about this item
What size air compressor fitting do I need to connect the 1/4 in male NPT inlet?
You need a 1/4 inch female NPT coupler or hose end to match the gun's male inlet thread.
Will the 326 lb thrust at 100 psi overpower a standard 10 oz cartridge?
The thrust is designed for 10 oz cartridges; regulate pressure below 100 psi for thinner materials to avoid excessive force.
How can I confirm the gun is delivering the rated 326 lb thrust after hooking it up?
At 100 psi supply pressure the gun should extrude stiff sealant steadily; the 82 dB sound level indicates normal operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
