We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
550 mm ARGB LED strip, 38 LEDs, 13 mm wide, 5.5 mm deep

Corn Electronics

Corn Electronics PH-NELEDKT_M5 550mm 38 LED filament

SKU CH-DK7V-HC5K2 MPN PH-NELEDKT_M5

A 550 mm ARGB strip with 38 addressable LEDs and a 5 V 3-pin connector for motherboard sync

  • 550 mm strip spans large cases with 38 addressable LEDs
  • KS6812 chip drives full colour ARGB effects
  • 5 V 3-pin connector plugs straight into compatible motherboards
  • Nine strong adhesive pads secure the 13 × 5.5 mm bar
  • Rated 20000-hour MTBF for long-term illumination

Targeted Illumination Kit

The Corn Electronics PH-NELEDKT_M5 is a 550 mm addressable LED filament designed for ARGB Symphony chassis, controllers and motherboards with a 5 V 3-pin header. Thirty-eight KS6812 LEDs provide full-colour digital RGB output across the strip length. Nine adhesive pads secure the flexible bar to motherboards, graphics cards or case panels for custom lighting layouts.

Capacity and Headroom

Thirty-eight individually addressable LEDs cover the 550 mm length with consistent colour mixing and smooth transitions. The 5 V supply limits total current draw, so very long daisy-chained runs may exceed the header rating and require a powered controller. The strip is built for standard chassis accent lighting rather than high-density matrix panels.

Thermals Noise and Power

Solid-state LEDs produce negligible heat during normal operation and run completely silently. Rated MTBF of 20000 hours indicates long-term reliability at the specified 5 V input. Power consumption scales with brightness and colour choice but remains well within typical motherboard 5 V 3-pin header limits for a single strip.

Highlights

  • 550 mm strip spans large cases with 38 addressable LEDs
  • KS6812 chip drives full colour ARGB effects
  • 5 V 3-pin connector plugs straight into compatible motherboards
  • Nine strong adhesive pads secure the 13 × 5.5 mm bar
  • Rated 20000-hour MTBF for long-term illumination

Specifications

No published specifications for this item yet.

Questions about this item

Will the 550 mm strip fit alongside my existing 5 V 3-pin ARGB header?

The strip draws 5 V through a standard 3-pin 5 V header, so it connects directly to the same header your current ARGB devices use.

How can I verify the KS6812 Symphony LEDs are running correctly after installation?

Each of the 38 LEDs should display smooth, full-colour transitions without flicker when driven by a compatible 5 V 3-pin controller.

Does the kit include the 600 mm motherboard adapter and the 9 adhesive pads, or must I buy them separately?

The package supplies the 550 mm LED bar, a 600 mm digital-RGB motherboard adapter, a 3-pin chassis controller and 9 adhesive pads for mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.