We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Half-height PCIe adapter board with M.2 slots and gold edge connector

Corn Electronics

Corn Electronics JEYI SK6 Half High M.2 NVMe & NGFF to PCI-E 3.0 x4 Adapter

SKU CH-9BZQ-Q148X

Converts M.2 NVMe and SATA SSDs to a PCIe 3.0 x4 slot with adjustable lengths and tantalum capacitors

  • Supports multiple M.2 lengths including 2230, 2242, 2260, 2280 and 110mm
  • Tantalum capacitors protect the installed SSD from power fluctuations
  • Half-height bracket fits low-profile chassis and standard slots
  • PCIe 3.0 x4 interface delivers up to 8 GB/s bandwidth
  • Driver-free installation works immediately with NVMe and SATA M.2 drives

Half-High M.2 Adapter

The Corn Electronics JEYI SK6 is a half-height PCIe 3.0 x4 add-in card that converts M.2 NVMe (M-Key) and NGFF (B-Key) solid-state drives for desktop use. It targets builders upgrading systems with spare expansion slots but no onboard M.2 connector.

Supported Lengths and Speed

The card accepts five module lengths: 2230, 2242, 2260, 2280 and 110 mm. Tantalum capacitors protect the installed drive, while the PCIe 3.0 x4 electrical interface delivers up to 8 GB/s bandwidth for NVMe devices.

Interface Limits

NVMe SSDs operate at full PCIe 3.0 x4 speed without drivers. B-Key NGFF drives are routed to a SATA connection instead, limiting them to the SATA interface maximum throughput. The half-high bracket may not fit low-profile cases.

Highlights

  • Supports multiple M.2 lengths including 2230, 2242, 2260, 2280 and 110mm
  • Tantalum capacitors protect the installed SSD from power fluctuations
  • Half-height bracket fits low-profile chassis and standard slots
  • PCIe 3.0 x4 interface delivers up to 8 GB/s bandwidth
  • Driver-free installation works immediately with NVMe and SATA M.2 drives

Specifications

No published specifications for this item yet.

Questions about this item

Will the JEYI SK6 fit in a half-height PCIe 3.0 x4 slot on an older motherboard?

Yes, the card is half-height and uses a PCIe 3.0 x4 interface, so it installs in any standard PCIe x4, x8 or x16 slot on older boards.

How can I confirm the adapter is running at PCIe 3.0 x4 speed after installing an NVMe drive?

Check the link width and generation in your motherboard BIOS or use a system tool such as GPU-Z; it should report PCIe 3.0 x4 for the NVMe device.

Does the package include mounting screws for 2230, 2242, 2260 and 2280 drives, or must I buy them separately?

The card provides five adjustable standoff positions (including 110 mm) that cover 2230, 2242, 2260 and 2280 lengths; screws are included so no separate purchase is needed.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.