Cordless Soldering Iron Kit 650mAh USB-C LED Screen 330-450°C 510 Thread
A cordless soldering pen with a 510-thread tip system, LED temperature display from 330 to 450°C, and a 650mAh battery that recharges via USB-C in 60 minutes for up to 30 minutes of use
- Watts8 watts
- Universal 510 thread fits many tips and accessories
- LED screen shows three settings from 330 to 450°C
- 650 mAh battery charges via USB-C in 60 minutes
- Up to 30 minutes cordless runtime for field repairs
- Light 1.06 oz pen design reduces hand fatigue
Portable Soldering Pen for Field Repairs
This cordless soldering iron kit is built for electronics repair, DIY projects and crafts where a mains outlet is not available. The pen-style body weighs 1.06 oz and runs on an internal 650mAh battery, so technicians and hobbyists can work untethered in tight spaces or on location.
USB-C Charging and 510 Thread Tips
A full charge takes 60 minutes over USB-C and provides up to 30 minutes of runtime. The industry-standard 510 threaded connector accepts a wide range of replacement tips, but users must ensure the tip is seated firmly or the thermal contact will be inconsistent.
Three-Step Temperature Range 330-450°C
The only specification that decides fit-for-purpose is the adjustable range of 330°C to 450°C shown on the LED screen. Buyers who need sustained output above 450°C or finer granularity than three preset steps should look elsewhere.
Highlights
- Universal 510 thread fits many tips and accessories
- LED screen shows three settings from 330 to 450°C
- 650 mAh battery charges via USB-C in 60 minutes
- Up to 30 minutes cordless runtime for field repairs
- Light 1.06 oz pen design reduces hand fatigue
Specifications
| Watts | 8 watts |
|---|
Questions about this item
How do I confirm the iron is at the right temperature after turning it on?
The LED screen displays the active setting; press the button to cycle through 330°C, 450°C and the intermediate level to verify the selected heat
What comes in the kit and what must I source separately?
The kit includes the pen, a 650mAh battery and USB-C charging; extra 510-thread tips and a USB power source are purchased separately
Which temperature setting should I choose for delicate electronics versus heavier joints?
Use 330°C for fine circuit work and 450°C for larger connections; the middle setting bridges both tasks
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
