We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 25-foot pressure washer hose with carbon steel fittings

Continental

Continental 20023677 pressure washer hose 1/4 in ID 25 ft

SKU CH-T4RV-DXW8F

Quarter-inch bore hose rated for 3,000 psi working pressure and a 12,000 psi burst rating, built with nitrile tube, neoprene cover and carbon-steel braid reinforcement for -20 °F to 250 °F operation

  • 3,000 psi working pressure handles tough cleaning jobs
  • 12,000 psi burst rating gives a 4:1 safety margin
  • Nitrile tube and neoprene cover resist oil, abrasion and weather
  • Operates from -20 to 250 °F for year-round use
  • 25 ft length with 1/4 in bore reaches distant surfaces

Continental 20023677 pressure washer hose

This 1/4 in ID hose delivers pressurised water to spray guns and lances on compatible machines. The 25 ft length gives reach around vehicles, patios and equipment without frequent repositioning. Rated for 3,000 psi working pressure at 70 F, it suits residential and light-commercial cleaning tasks. A 4:1 safety factor and 12,000 psi burst rating provide a strong margin above normal operating loads.

Suits owners needing a replacement

The carbon-steel braid reinforcement and nitrile tube resist oil, abrasion and temperatures from -20 F to 250 F. Neoprene cover adds weather and chemical resistance for outdoor storage. Builders who need a larger inside diameter for higher flow rates should look at something else. Users requiring metric-threaded ends or quick-connect couplers will need a different hose assembly.

25 ft of 1/4 in bore handles typical driveway.

The 2 1/2 in bend radius allows tight routing around corners without kinking. At 3,000 psi the hose runs out of headroom for industrial hydro-blasting or ultra-high-pressure surface preparation. Continuous operation near the 250 F upper limit will shorten service life compared with cooler use. For jobs demanding longer reach, a single 25 ft section falls short and must be coupled.

Highlights

  • 3,000 psi working pressure handles tough cleaning jobs
  • 12,000 psi burst rating gives a 4:1 safety margin
  • Nitrile tube and neoprene cover resist oil, abrasion and weather
  • Operates from -20 to 250 °F for year-round use
  • 25 ft length with 1/4 in bore reaches distant surfaces

Specifications

BrandCONTINENTAL

Questions about this item

Will the 1/4 in ID hose connect to my pressure washer's MNPT fitting?

Hose Fitting A is an MNPT carbon steel fitting, so it will thread onto any matching female NPT port on the pump or gun.

Can I keep using my existing quick-connect couplers with this 25 ft hose?

The supplied end is MNPT; you can thread your current quick-connect plug or socket onto that fitting without changing the hose.

How do I verify the hose is holding its 3,000 psi rating after installation?

Pressurise the system at 70 °F and check for leaks at the fittings; the hose is built to a 4:1 safety factor with a 12,000 psi burst rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.