Condor
Condor 48FZ13 Drain Seal 36in x 36in x 3/8in Yellow
Yellow polyurethane drain seal covers square drains up to 30 by 30 inches for NPDES and SPCC spill containment
- ColorYellow
- High-visibility yellow polyurethane seals drains fast
- 36 by 36 inch sheet covers 30 by 30 inch openings
- 3/8 inch thick polyurethane resists chemicals and wear
- Meets NPDES and SPCC standards for spill compliance
- California Proposition 65 warning for cancer and reproductive harm
Condor 48FZ13 Drain Seal
The Condor 48FZ13 is a polyurethane drain seal measuring 36in by 36in with a 3/8in thickness. It is designed for facilities that need to block square drains up to 30in by 30in during spills or maintenance. The bright yellow colour makes the seal easy to locate in an emergency. It meets NPDES and SPCC standards for spill containment.
Build and daily use
The polyurethane construction resists oils, chemicals and weathering so the seal stays flexible across temperature changes. Its flat, square profile lays flush over the grate without bolts or clips, allowing one person to position it quickly. The material cleans with water and mild detergent, then stores flat for the next deployment.
Deciding specification
The critical figure is the maximum drain size of 30in by 30in; the seal will not cover larger openings. Buyers with round or rectangular drains exceeding those dimensions need a different solution. The seal also carries a California Proposition 65 warning for cancer and reproductive harm.
Highlights
- High-visibility yellow polyurethane seals drains fast
- 36 by 36 inch sheet covers 30 by 30 inch openings
- 3/8 inch thick polyurethane resists chemicals and wear
- Meets NPDES and SPCC standards for spill compliance
- California Proposition 65 warning for cancer and reproductive harm
Specifications
| Brand | CONDOR |
|---|---|
| Color | Yellow |
Questions about this item
What NPDES and SPCC standards does the 48FZ13 drain seal meet?
The seal is manufactured to NPDES and SPCC standards for spill containment and stormwater compliance.
What size square drain will the 36in x 36in polyurethane seal cover?
It fits square drains up to 30in x 30in, leaving a 3in overlap on each side.
How do you install the 3/8in thick polyurethane drain seal so it seals properly?
Clean the surface, centre the yellow pad over the drain, and press firmly around the full perimeter to remove air pockets.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
