We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue polyester shock-absorbing lanyard with dual legs, steel rebar hooks, web loop harness end, tubular webbing core

Condor

Condor 45J288 Shock Absorbing Lanyard 6 ft 2 Leg Blue

SKU CH-GEKT-M91G2

Shock-absorbing twin-leg lanyard with tubular webbing, steel rebar hooks and a 310 lb capacity for fall protection

  • ColorBlue
  • Shock-absorbing tubular webbing reduces fall impact forces
  • Dual-leg design provides continuous tie-off while moving
  • 310 lb weight capacity supports a wide range of users
  • Visual load indicator shows when the lanyard has been stressed
  • Meets ANSI Z359.13-2013 fall protection standard

Condor 45J288 6 ft Shock Absorbing Lanyard

The Condor 45J288 is a 6 ft two-leg shock absorbing lanyard built for fall protection on construction and maintenance sites. It connects a full-body harness to an anchorage point and limits arresting forces during a fall. The tubular polyester webbing stretches under load to reduce peak force on the worker. A visual load indicator shows when the unit has been subjected to a fall and must be removed from service.

310 lb Capacity with ANSI Z359.13 2013 Compliance

The lanyard is rated for a 310 lb weight capacity covering the user plus tools and gear. Steel rebar hooks at the anchorage ends provide secure attachment to compatible structural anchors. The harness ends use polyester web loops for a lightweight connection to the harness dorsal D-ring. The fixed 6 ft length offers no adjustment, so total fall clearance must account for the full deployed length plus deceleration distance.

Steel Hardware and Polyester Webbing for Vertical

Steel rebar hooks and polyester webbing resist abrasion and UV exposure common in outdoor and industrial environments. The fixed-length design eliminates moving adjustment hardware that can snag or freeze. Users needing adjustable positioning, tie-back hooks, or a single-leg configuration will need a different lanyard model. Always verify anchorage strength and fall clearance before each use.

Highlights

  • Shock-absorbing tubular webbing reduces fall impact forces
  • Dual-leg design provides continuous tie-off while moving
  • 310 lb weight capacity supports a wide range of users
  • Visual load indicator shows when the lanyard has been stressed
  • Meets ANSI Z359.13-2013 fall protection standard

Specifications

ColorBlue
BrandCONDOR

Questions about this item

Will the 6 ft two-leg lanyard with rebar hooks reach the same anchor points I use with my older single-leg 4 ft lanyard?

Each leg extends to 6 ft and ends in a steel rebar hook, so the reach is longer than a 4 ft single-leg model; you will need anchor points spaced for the wider two-leg stance.

How do I confirm the tubular webbing shock absorber has not deployed after a fall?

The visual load indicator on the webbing shows a clear mark once the shock-absorbing section has been activated, signalling the lanyard must be removed from service.

Does the package include a harness or only the lanyard with its web-loop harness ends?

Only the lanyard is supplied — two polyester legs with web-loop harness connections and steel rebar hooks at the anchorage ends; a compatible full-body harness must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.