Condor 45J282 Shock Absorbing Lanyard 54 in 310 lb

Shock-Absorbing Lanyard for Fall Protection

The Condor 45J282 is a single-leg shock-absorbing lanyard built for workers who need fall protection with a 310 lb weight capacity. Its tubular polyester webbing stretches from 4 ft. 6 in. to a maximum working length of 54 in. to limit free-fall distance. A steel rebar hook anchors the lanyard while a steel snap hook connects to the harness. The integrated visual load indicator shows if the unit has deployed. Meets ANSI Z 359.13 -2013.

Simple Connection With Steel Hardware

Both ends use steel hardware that clips directly to compatible anchor points and harness D-rings without tools. The adjustable length lets workers set the lanyard to the job, reducing slack and tripping hazards. What usually goes wrong is attaching the rebar hook to an anchor that cannot accept its gate opening or exceeding the 310 lb capacity with tools and gear combined. Always verify the anchor rating and total user weight before each use.

310 lb Capacity With Deployable Energy Absorption

The energy absorber is rated for users up to 310 lb including clothing and equipment. In a fall the tubular webbing extends to dissipate forces within the ANSI Z 359.13 -2013 limits. Headroom runs out when the anchor point is too low to allow full deployment before the lower level is struck, or when the combined weight of the worker and tools exceeds the 310 lb limit. Plan the anchor height and total load accordingly.