We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips side by side

Computer Memory Solutions

Computer Memory Solutions CM5126410600SODRH 8GB (2x4GB) DDR3 10600 1333 SODIMM memory upgrade

SKU CH-HD8J-341Y8

Dual-channel 8 GB DDR3 SO-DIMM kit (2 × 4 GB) validated for Panasonic Toughbook 52 Mk4 CF-52Txxx series

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 8GB kit upgrades Panasonic Toughbook 52 Mk4 to 16GB maximum
  • 1333MHz DDR3 speed with CL7 latency for responsive system performance
  • 204-pin SO-DIMM form factor fits both expansion sockets exactly
  • 5V unbuffered non-ECC modules install without configuration changes
  • Matched 2x4GB pair enables dual-channel operation on compatible hardware

System-specific DDR3 SODIMM kit

This 8 GB kit contains two 4 GB unbuffered DDR3 SO-DIMMs rated at 1333 MHz with CL7 timings and 1.5 V operation. The modules use a 204-pin layout and 2Rx8 organisation built from major-brand components. They are validated for Panasonic Toughbook 52 Mk4 CF-52 and CF-52Txxx series laptops.

Buyers upgrading a compatible Toughbook

The kit suits owners of the listed Panasonic models who need to reach the 16 GB platform maximum across the two available sockets. It does not suit systems that require ECC or registered memory, nor machines limited to a single SODIMM slot. Laptops outside the specified CF-52 families should consult their own qualified-vendor lists before ordering.

DDR3 1333 MHz SO-DIMM generation

The single specification that decides fit is the DDR3 1333 MHz SO-DIMM interface with 204 pins and 1.5 V signalling. A motherboard wired for a different DDR generation or a different pin count will not accept these modules, so the laptop must explicitly support this memory type.

Highlights

  • 8GB kit upgrades Panasonic Toughbook 52 Mk4 to 16GB maximum
  • 1333MHz DDR3 speed with CL7 latency for responsive system performance
  • 204-pin SO-DIMM form factor fits both expansion sockets exactly
  • 5V unbuffered non-ECC modules install without configuration changes
  • Matched 2x4GB pair enables dual-channel operation on compatible hardware

Specifications

BrandComputer Memory Solutions
ModelCM5126410600SODRH
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemPanasonic Toughbook 52 Mk4 Cf-52 (Cf-52Txxx) Series
Package Content2 Memory RAM Sticks

Questions about this item

What speed does the DDR3 10600 interface run at in practice?

The modules operate at 1333 MHz, which is the rated speed for the PC3 10600 standard.

What physical slot and form factor do these sticks need?

They are 204-pin DDR3 SO-DIMMs, the standard size for laptop memory slots.

How are the two 4 GB modules installed in the Toughbook 52 Mk4?

The system has two sockets supporting up to 16 GB total; insert one stick per slot until the side clips click.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

More in System Specific Memory

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.