We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM memory module with black chips no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM10246412800SODRL 8GB DDR3L 1600MHz CL11 1.35V SODIMM

SKU CH-12V3-PTF2X

8GB DDR3L SODIMM at 1600MHz CL11 for HP All-in-One 19-2207la, 19-2230la, 19-2304, 19-2316l

  • Capacity8GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.35V
  • 8 GB capacity adds multitasking headroom for everyday workloads
  • DDR3L 1600 MHz speed matches the original system specification
  • CL11 11-11-11 timings deliver responsive memory access
  • 35 V low-voltage operation reduces power draw and heat
  • Tested compatible with HP All-in-One 19-2207la 19-2230la 19-2304 19-2316l

8GB DDR3L SODIMM for HP All-in-One

This 8 GB DDR3L module runs at 1600 MHz with CL11 timing and 1.35 V operation. It uses a 204-pin SO-DIMM form factor and is unbuffered non-ECC memory. The kit contains a single stick built with major-brand chips. It targets owners of the listed HP All-in-One models who need a straightforward capacity increase.

Suits HP All-in-One 19-2207la, 19-2230la.

Buyers with different laptop or desktop platforms should look elsewhere because the module is validated only for those four model numbers. Systems that require ECC or registered memory cannot use this unbuffered stick. Machines limited to 1.5 V DDR3 without DDR3L support may not boot with this 1.35 V part.

1600 MHz DDR3L speed with CL11 latency

The rated speed of 1600 MHz (PC3L 12800) and CAS latency of 11 decide whether the module matches the memory controller requirements of the target HP All-in-One systems. If the platform demands a different frequency or tighter timing, this stick will not be the correct choice.

Highlights

  • 8 GB capacity adds multitasking headroom for everyday workloads
  • DDR3L 1600 MHz speed matches the original system specification
  • CL11 11-11-11 timings deliver responsive memory access
  • 35 V low-voltage operation reduces power draw and heat
  • Tested compatible with HP All-in-One 19-2207la 19-2230la 19-2304 19-2316l

Specifications

BrandComputer Memory Solutions
ModelCM10246412800SODRL
Capacity8GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP All-in-One 19-2207la, 19-2230la, 19-2304, 19-2316l
Package Content1 Memory RAM Stick

Questions about this item

Will the 204-pin SODIMM fit the HP All-in-One 19-2207la memory slot?

Yes, the module uses the standard 204-pin DDR3 SODIMM form factor that matches the HP All-in-One 19-2207la expansion sockets.

What is the correct way to seat the module so the 1.35V DDR3L stick is recognised at 1600 MHz?

Align the notch with the slot key, insert at a 30-degree angle, then press down firmly until both side clips click — partial insertion is the most common reason the system does not detect the RAM.

When should I expect to replace this CL11 8 GB DDR3L module in the HP All-in-One 19-2304?

DDR3L SODIMMs have no moving parts and typically last the usable life of the All-in-One; replacement is only needed if a memory test reports errors or you upgrade to the 16 GB maximum across both sockets.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

More in System Specific Memory

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.