We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1333MHz CL9 Kit for Gateway Dx4870, Dx4860

SKU CH-62PQ-A9JPB

An 8 GB DDR3 1333 MHz dual-channel kit built for Gateway DX4870 and DX4860 desktops

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 8GB kit expands Gateway desktop memory to 16GB maximum
  • Dual 4GB modules populate two of four DIMM slots
  • DDR3 1333MHz CL9 timing matches system specification
  • Unbuffered non-ECC 240-pin DIMMs fit Gateway DX4870 and DX4860
  • 5V operation at standard DDR3 voltage for stable performance

8GB DDR3 Kit for Gateway Desktops

This 8GB kit contains two 4GB DDR3-1333 modules built for Gateway DX4870 and DX4860 desktops. It uses 240-pin unbuffered DIMMs running at 1.5V with CL9 timing. The kit suits owners of those models who need a straightforward memory increase.

Upgrade from Lower Capacity or Slower Modules

The Gateway DX4870 and DX4860 support a maximum of 16GB across four slots. This kit fills two slots with 8GB total, leaving room for further expansion. It replaces factory-installed modules that may be smaller or slower than PC3-10600 speed.

Simple DIMM Installation with Standard Precautions

Installation follows the normal desktop DIMM procedure: power off, open the case, align the notch, and press until the latches click. The modules have no heat spreader, so they fit tight spaces, but handle them by the edges to avoid static damage. Picture shown is for reference only; actual module appearance may vary.

Highlights

  • 8GB kit expands Gateway desktop memory to 16GB maximum
  • Dual 4GB modules populate two of four DIMM slots
  • DDR3 1333MHz CL9 timing matches system specification
  • Unbuffered non-ECC 240-pin DIMMs fit Gateway DX4870 and DX4860
  • 5V operation at standard DDR3 voltage for stable performance

Specifications

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemGateway Desktop Dx4870-Ur21P, Dx4860-Ub20P
Package Content2 Memory RAM Sticks

Questions about this item

Will the 240-pin DDR3 DIMMs fit the four memory slots in my Gateway DX4870 or DX4860 desktop?

Yes, the kit uses standard 240-pin DDR3 DIMMs that match the four DIMM sockets on the Gateway DX4870-UR21P and DX4860-UB20P motherboards.

What is the correct way to seat the two 4 GB modules, and what step do people often miss?

Align the notch on each module with the slot key, press straight down until both side clips click, and install the pair in the same-coloured slots for dual-channel operation.

When should I expect to replace these CL9 1.5 V DDR3 sticks?

DDR3 modules have no moving parts and typically last the life of the system; replace only if a memory test reports errors or the motherboard fails to recognise a stick.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

More in System Specific Memory

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.