We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 SO-DIMM sticks, 204-pin, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1066MHz CL7 SO-DIMM for Asrock CoreHT 231B Vision 3D 156B

SKU CH-XCP5-VEJCJ

An 8 GB DDR3 SO-DIMM kit running at 1066 MHz CL7 for ASRock CoreHT 231B and Vision 3D 156B mini PCs

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 8GB dual-channel kit boosts multitasking on compatible Asrock Mini PCs
  • CL7 latency at 1066MHz delivers responsive DDR3 performance
  • 204-pin SO-DIMM form factor fits CoreHT 231B and Vision 3D 156B slots
  • 5V unbuffered non-ECC modules install without BIOS changes
  • Two matched 4GB sticks enable full 8GB capacity upgrade

System-specific DDR3 SO-DIMM kit

This 8GB kit contains two 4GB DDR3 1066MHz SO-DIMM modules built for the Asrock CoreHT 231B and Vision 3D 156B mini PCs. It uses 204-pin unbuffered non-ECC memory running at 1.5V with CL7 timings. The kit matches the exact specification those systems require.

Straightforward slot installation

Each module inserts vertically into the SO-DIMM sockets until the side clips lock. The low-profile design has no heat spreader, so clearance inside the compact chassis is not an issue. Problems only appear if the slots are dusty or if a module is not fully seated before the clips engage.

Steady throughput for everyday workloads

At DDR3 1066 (PC3 8500) with 7-7-7 timings the memory delivers consistent bandwidth during extended office, media or light multitasking sessions. The unbuffered 2Rx8 organisation keeps latency stable without the variability seen in registered designs. It is not intended for workloads that need ECC error correction or higher frequencies.

Highlights

  • 8GB dual-channel kit boosts multitasking on compatible Asrock Mini PCs
  • CL7 latency at 1066MHz delivers responsive DDR3 performance
  • 204-pin SO-DIMM form factor fits CoreHT 231B and Vision 3D 156B slots
  • 5V unbuffered non-ECC modules install without BIOS changes
  • Two matched 4GB sticks enable full 8GB capacity upgrade

Specifications

BrandComputer Memory Solutions
ModelCM512648500SODRH
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemAsrock Mini Pc Coreht 231B, Mini Vision 3D 156B
Package Content2 Memory RAM Sticks

Questions about this item

How can I verify the kit is running at 1066 MHz with CL7 timings after installation?

Open Task Manager or a tool like CPU-Z and check that the memory frequency shows 1066 MHz (PC3-8500) with timings of 7-7-7 at 1.5V.

What comes in the box and do I need anything else for the CoreHT 231B or Vision 3D 156B?

The package contains two 4 GB DDR3 SO-DIMM sticks (model CM512648500SODRH). No extra parts are required for the listed ASRock Mini PCs.

Which capacity should I choose if the Mini PC supports a maximum of 8 GB across two sockets?

This 8 GB kit (2 x 4 GB) fills both sockets and matches the system's 8 GB maximum, so no other capacity is needed.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

More in System Specific Memory

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.