We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 240-pin DDR3 memory module, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 4GB DDR3 1600 CL11 2Rx8 1.5V memory upgrade

SKU CH-B0B9-S7GEH

A 4 GB DDR3 1600 CL11 module that upgrades compatible HP Pavilion desktops to 16 GB maximum memory

  • Capacity4GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • Ready for HP Pavilion 500 and P6 series desktops
  • 4 GB DDR3 1600 MHz CL11 adds responsive multitasking
  • Single 240-pin DIMM installs in an empty slot
  • Unbuffered non-ECC 1.5 V module matches system specs
  • Major-brand chips backed by CMS lifetime warranty

4GB DDR3 1600 Module for HP Pavilion

This 4 GB DDR3 1600 CL11 unbuffered DIMM is built for HP Pavilion 500-B23W, 500-C00Z, P6-2480Ea and P6-2420L desktops. It runs at 1.5 V with 11-11-11 timing and uses a 2Rx8 rank layout on a 240-pin interface. The single stick adds 4 GB of non-ECC memory to compatible systems.

Upgrade Path from Lower Capacity or Speed

The module replaces slower DDR3 modules or smaller capacity sticks in the supported Pavilion models. It is worth fitting when the board has a free 240-pin slot and the current memory runs below 1600 MHz or totals less than the 16 GB maximum the platform accepts. Builders needing ECC, registered buffers or speeds above 1600 MHz should look elsewhere.

Steady Operation at Rated Speed

Under sustained load the stick maintains its 1600 MHz data rate and CL11 latency without a heat spreader. The 1.5 V supply keeps power draw predictable during long sessions. Stability relies on the system's own airflow since no dedicated cooling is present on the module.

Highlights

  • Ready for HP Pavilion 500 and P6 series desktops
  • 4 GB DDR3 1600 MHz CL11 adds responsive multitasking
  • Single 240-pin DIMM installs in an empty slot
  • Unbuffered non-ECC 1.5 V module matches system specs
  • Major-brand chips backed by CMS lifetime warranty

Specifications

BrandComputer Memory Solutions
ModelCM5126412800DIMMHDR
Capacity4GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Pavilion 500-B23W, 500-C00Z, P6-2480Ea, P6-2420L
Package Content1 Memory RAM Stick

Questions about this item

Will the 240-pin DDR3 module fit the HP Pavilion 500-B23W DIMM slots?

Yes, the 240-pin DDR3 DIMM matches the HP Pavilion 500-B23W memory slots and the system accepts up to 16GB total across two sockets.

What is the correct way to seat the unbuffered DIMM so the motherboard recognises the full 4GB?

Align the notch on the module with the slot key, press down firmly until both retention clips click into place, then verify 4GB appears in BIOS.

Does the 1.5V CL11 stick need any firmware updates or periodic cleaning to keep its lifetime warranty valid?

No firmware updates are required; keep the gold contacts free of dust and the module will remain covered by the manufacturer’s limited lifetime warranty.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

More in System Specific Memory

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.